The TL-H28RD is used, and if you need to use an extender to expand the range, you need to add the extender to the TL-H28RD to push the router's wireless configuration to the extender for wireless roaming network.
This document guides you through how to add extenders to your TL-H28RD with your phone.
1
Connect to the router wireless signal
Connect your phone or Pad to the vro as follows:
2
, Logon Management Interface
Open your mobile browser and enter the tplogin.cn logon management interface in the address bar, as shown below:
Enter the management password and click
Add new device:
Note:The logon password is the management password you set when setting the vro for the first time. If you forget the password, you need to reset and reset the vro.
3
Scan extenders
Check that one or more extenders are powered on. Click
Next Step, As follows:
Note:: If the HyFi extender has the Config button, after the power outlet is inserted, press the Config button first.
The router starts scanning extenders:
4
, Add extenders
After scanning the extended Device, Click
Join. As follows:
After successful addition, the system prompts "added" as follows:
Click
Complete, As follows:
So far, the extended device is added. If you have a new extended device to be added, click
Add new deviceIn step 3.
After adding the wireless signal, the router automatically pushes the wireless signal to the extended device to completely overwrite the wireless signal.
Unable to find extenders?
Confirm and try the following operations:
[1] The expansion device is powered and the indicator light is on;
[2] If the extender has the Config button, click it and observe that the indicator is flashing. Try again;
[3] confirm that the power line between the extender and the router has not passed through the electric meter;
[4] move the extender to the socket near the router and try again;
[5] avoid interference from high-power electrical appliances.
