NVRManagement address
You can configure the nvr ip address on the WEB interface or GUI.
Pass
GUI
Interface Configuration
NVR connects to the display screen through the VGA or HDMI interface, log on to the NVR management interface, right-click and choose
Main menu
>
Set
>
Network Settings
>
Connection,
ModeSelect static IP, set the IP address, and save it.
Pass
WEB
Interface Configuration
Log on to the WEB page through the NVR management address on the LAN computer, and click
Set
>
Network
>
Connection,
ModeSet it to "Static IP", modify the IP address, and save it.
Note:If you do not remember the nvr ip address, log on to the GUI to view/modify it.
IPC
You can configure the IP address of the IPC through the WEB interface or the TP-LINK security system.
Pass
TP-LINK
Security System client configuration
Install and run on your computer
TP-LINK
Security
System, Click
Set
>
Device List
>
Device to be addedSelect the IPC to be configured and click
Network Configuration, Enter the IP address and gateway, and confirm the modification.
Note:If IPC is in a device that has been added and the IP address cannot be configured through the TP-LINK security system, configure it through the WEB interface.
Pass
WEB
Interface Configuration method
Log on to the ipc web page and click
Set
>
Network
>
Connection,
ModeSet "static IP address", modify the IP address, and save it.
