How fast wireless routers set up

Fast wireless router also has super crack network blocking ability, for all over the country a variety of blocked routing phenomenon (such as network Vanguard, star speed, letter wind, etc.) the fastest to provide the latest breaking ban upgrade software, network resources sharing, not limited by operator ban.

Enter 192.168.1.1 In the browser, log on to the router, and choose to encrypt in the left wireless parameter option. Need to use the factory provided by the original router account, password (generally: admin), enter the Router page, enter the telecommunications department to provide broadband accounts, passwords, IP settings and wireless password settings.

In the network parameters set the connection type for PPPoE, enter the account number and password, the connection mode is generally automatic connection, point save.

In DHCP, select Enable, other keep the default, this is the dynamic allocation of IP, otherwise need to set their own IP. Point save.

OK, and finally don't forget to reboot the router for the configuration to take effect.

Then you can connect the net, at this time your computer can be set to automatically obtain IP. Enter the route, select wireless network settings----Turn on wireless, turn on radio---and then wireless security settings----You choose frequency bands WEP, WAP/WAP2, and WAP-PSK/WAP2-PSK. Any one of the band-----Enter your own password on the line! Save---Restart route !

Fast Wireless Router Setup Graphics Tutorial:

Physical connection of a device

The Wired connection computer connects the router's LAN port, and the network cable connects the router's WAN port, and the wireless connection is connected to the router through the wireless function after the router is set up. (pictured below)

Second, establish the correct network settings

2.1 Set the IP address of the computer. Right-click on "My Network Neighborhood"-"properties" (pictured below)

"Local Area Connection"--"properties" (pictured below)

Click "Properties" after clicking TCP/IP in the following figure

Set the IP address to "192.168.1.152, subnet mask 255.255.255.0, default gateway 192.168.1.1", as shown in the following illustration

The 2.2 test order checks to see if there is connectivity between your computer and the router. Click "Start"-"Run"-"Enter cmd" click OK. Entering Ping 192.168.1.1 in the Open CMD window shows the following results. The description is nearly connected to the router.

Third, set up the router

Open IE browser to enter the router's address: http://192.168.1.1, you will see the following picture shows the login interface. You need to be logged on as a system administrator by entering a username and password (the factory setting for the username and password is admin) in the login interface, and then clicking the OK button.

If the username and password are correct, the browser will display an administrator-mode screen, and a Setup Wizard page with the following image will pop up (if it doesn't pop up, you can activate it by clicking the Wizard menu on the left of the admin mode screen).

The main screen after logging on to the router can be set manually by clicking the Setup Wizard

Click Next to go to the Internet to select the screen. Here we demonstrate the way the PPPoE dial-up Internet is used by average home users. Specific according to your actual situation.

Enter the user name and password for the broadband Internet connection provided by your ISP in the following illustration. Telecommunications Internet account password (by their staff to tell you).

When the settings are complete, click Next, and you will see the basic wireless network parameter Settings page as shown in the following figure.

Set up your wireless internet password, which is your own phone or WiFi password for other wireless devices.

When the settings are complete, click Next, and if you change the wireless settings, the Setup Wizard, shown in the following illustration, completes the interface and clicks Restart to make the wireless settings take effect.

If you do not change your wireless settings, the Setup Wizard, which appears as shown in the following illustration, completes the interface and clicks Finish the Setup wizard.

The point to note here is that the channel bandwidth settings mentioned above are only for network devices that support IEEE 802.11n protocols, and this setting does not take effect for devices that do not support IEEE 802.11n protocols.

Wireless status: Turn on or off the wireless function of the router.

SSID: Set any string to indicate your wireless network. (Mark this wifi is your home)

WPA-PSK/WPA2-PSK: Your router wireless network encryption method, if selected, please enter the password you want to set in the PSK password, the password requires 64 hexadecimal characters or 8-63 ASCII characters. (People often ask for your WiFi password)

Do not modify wireless security settings: Select the key, the wireless security option will keep the parameters you set last. If you have never changed your wireless security settings, you will leave the factory default setting to turn off wireless security when you select the item.