Fault symptom:
The keyboard shortcut for Lenovo computer to enter BIOS is"
F2, F1, Del/Delete, NOVOBoot"
For some models, press
F2, F1Required
FNKey combination
Note: To use a Windows 8/8.1 operating system computer, you need to select restart under the system. On the "boot self-check interface", click the corresponding shortcut key to enter the BIOS interface. For details, see the following solution.
Solution:
Applicability:
IdeaPad y z g series model full series notebook (Early u s full series)
Lenovo Erazer z n y full range notebook
Zhaoyang series K47, E47 and earlier products
Yangtian series V470, B470, and earlier products
Early Sunday, Tianyi full range of notebooks
Tip:If you are using a Win8/8.1 system, we strongly recommend that you press the shortcut key to enter the BIOS when you restart your computer.
Operation method:
1. In the Lenovo image self-check after the instance is started or restarted, press the F2 button on the keyboard multiple times to enter the BIOS interface. As shown in the following figure:
Reminder:Some models need to enter using the "Fn + F2" hotkey.
2. Press the F2 button on the notebook keyboard in the upper left corner of the keyboard. As shown in the following figure:
How to enter BIOS for desktops, all-in-one devices, and some business laptops
Applicability:
Full range of Lenovo desktops (note: Products released after 2010)
All-in-one IdeaCentre
Zhaoyang K49, E49, and later models (note: All models released after January 1, 2012)
Lenovo vrouters, bits, M490, and later (note: All models released after January 1, 2012)
Tip:If you are using a Win8/8.1 system, we strongly recommend that you press the shortcut key to enter the BIOS when you restart your computer.
Operation method:
1. In the Lenovo image self-check after the instance is started or restarted, press the F1 button on the keyboard multiple times to enter the BIOS interface. As shown in the following figure:
2. Press the F1 button on the keyboard in the upper left corner of the keyboard. As shown in the following figure:
How to enter BIOS for Think Products
Applicability:
Full range of ThinkPad notebooks
All-in-one ThinkCentre
ThinkStation full range of workstations
Tip:If you are using a Win8/8.1 system, we strongly recommend that you press the shortcut key to enter the BIOS when you restart your computer.
Operation method:
1. In the Lenovo image self-check after the instance is started or restarted, press the F1 button on the keyboard multiple times to enter the BIOS interface. As shown in the following figure:
2. The position of the F1 button on the keyboard, in the upper left corner of the keyboard. As shown in the following figure:
3. Some models continuously press Enter at startup, and a function menu will appear, with 15 seconds to select the desired function.
(Menus are slightly different for different models. The menus and icons shown in the following figure are for reference only)
ESC: resume normal start
F1: Enter the BIOS settings page
F10: Go to hardware detection
F11: One-click Recovery
F12: Select the boot drive
How to enter BIOS for early desktop products
Applicability:Early Desktop
Tip:If you are using a Win8/8.1 system, we strongly recommend that you press the shortcut key to enter the BIOS when you restart your computer.
Operation method:
1. In the Lenovo image self-check after the instance is started or restarted, press the "Delete" button on the keyboard multiple times to enter the BIOS interface. As shown in the following figure:
2. The "Delete" button of a common desktop keyboard is located on the right side of the return key. As shown in the following figure:
How to start BIOS with The NOVO key
Applicability:
Some notebook products released after 2012, including the full series of IdeaPad and Lenovo G series
Some IdeaPad U or S series, YOGA/FLEX full series products
Lenovo Erazer z n y full range notebook
Tip:If you are using a Win8/8.1 system, we strongly recommend that you press the shortcut key to enter the BIOS when you restart your computer.
Operation method:
1. When the instance is shut down, connect to the power adapter or battery. Find and press "NOVO", as shown in the figure:
Tip:If you cannot find this button for some models, this operation is not supported.
Wait for a moment, as shown in the following figure. Move the cursor to the third item, Enter Setup, and press Enter to Enter the BIOS settings page.
Some models are displayed as BIOS Setup, as shown in the figure below:
3. Follow these steps to go to the BIOS Setup interface.
