How TP link Sets Port mappings

TP Link Sets the method of port mapping

Set method One:

1, add new entries, login to the Router management interface, enter the forwarding rules > virtual Server, and click Add new entries.

2, add mapping rules. Add the ports that the server maps to the extranet, the actual port, and the server IP address.

Note: The service port can be modified according to the actual needs, and the internal port must be consistent with the server port.

3, after the completion of the list is as follows: At this point, the virtual server (port mapping) rule setup completes.

Set method Two:

1, download and landing peanut shell dynamic Domain name analysis software;

2, click the Intranet map to open the Web-side Settings page;

3, click Add Mapping, fill in mapping information;

4, click OK, you can generate an external network access address.

Third, external network access to the intranet server

1, according to the above settings, the external network computer through the browser to enter the domain name or IP address + port number to access the Web server, access to the following forms:

Note: Some servers require the use of client or app access, the specific form of access to the actual server requirements prevail. If your broadband is not a static IP address, you can request a domain name in Dynamic DNS and log in to the router, and then use your domain name and an open port number to access the server after you log on.