How routers view routing tables and static routes

1 Routing List

This page shows the core routing table for this router.

The main task of the router is to find an optimal transmission path for each packet that passes through the router and effectively transfer the data to the destination site. In order to complete this work, in the router to save a variety of transmission path related data-routing table, for the router to choose to use.

2 Static routing

This page is used to set the router's static routing capabilities.

Destination Network IP: The destination host or IP network segment that is accessed.

Subnet mask: Fills in the subnet mask, typically 255.255.255.0.

Gateway: The IP address of the next-hop router entry.

Attention:

1, the gateway must be with this router LAN port IP belongs to the same network segment.

2. If the destination IP address is a host IP address, the subnet mask must be 255.255.255.255.

3, if the destination IP address is an IP network segment, you must match the subnet mask. For example, if the destination IP is 10.0.0.0, the subnet mask is 255.0.0.0.

How to view routing tables and static routes in routers have you learned? It is not very simple, you need to use this information when you can easily achieve, no longer find someone else.