How the Apple Mac system installs the virtual machine

HP Computers use the Ghost XP installation system to set the first method:

1, press F10 into the CMOS

2. Find the Power Settings item (Management Setup)----WDRT support This setting is last disabled

3, press F10 Save exit

HP Computer with Ghost XP installation system set the second method

Specific steps to operate:

The first step: press F10 to enter the BIOS setup and come to the basic information interface.

Step two: Use the left and RIGHT arrow keys to select the Advanced (Advanced settings) option.

The third step: using the next key to select the "Onboard Pata/sata adapters", which is the choice of the port/serial port of the meaning of the hard disk.

The fourth step: Select the third "SATA1 Controller mode" serial disk model control.

Fifth step: The machine original serial port hard disk mode for the IDE, that is, this mode can only install the original operating system, can not install the ghost version of the operating system, change hit enter.

Sixth step: Select "AHCI" mode. This mode only installs the Ghost version of the system, but does not start the machine normally.

Seventh step: Press F10 to save exit.

Installation method:

The first step, download install virtual Box VM

One of the virtual machines to use here is the virtual Box. We first open the virtual machine download page: Https://www.virtualbox.org/wiki/Downloads, click on the page "VirtualBox 4.3.6 for OS X hosts x86/amd64" Download link, as shown in the picture:

2. After the download, in the Finder in the download directory, find the "virtualbox-4.3.4-91027-osx.dmg" file, run the installation, as shown in the figure:

3. After opening, double-click "Virtual box.pkg" in the installation interface to start the installation, as shown in the figure:

4. Then the system will be a security prompt, click the "Continue" button, as shown in the picture:

5. Then click on the "Continue" button.

6. After the installation is complete, in the system Lanuchpad can find the application icon of Virtual Box, click to open it, as shown in the picture

7. Next in the Virtual box interface, click the "New" button in the upper-left corner to start creating a virtual machine.

Step two, download install Virtual machine Hardware expansion pack support

If you want to use the hardware peripherals attached to the MAC on the virtual machine, such as U disk, IPhone, and so on, we need to download a hardware support extension installation package on the website of fictitious Box. In the same way, we first open the download page of the virtual machine: https://www.virtualbox.org/wiki/Downloads, click the "all supported Platforms" Download link in the page, as shown in the picture:

2. After the download is complete, in the Finder's download directory, locate the "oracle_vm_virtualbox_extension_pack-4.3.6-91406.vbox-extpack" installation package and double-click to run it, as shown in the figure:

3. Then follow the prompts to install it.

Eighth step: Machine reboot, put into ghost version operating system CD, start reading disk, and install system. The Nineth step: Installs the system, the machine restarts, then presses F10 to enter the BIOS, the hard disk mode changes back to the IDE mode, the machine starts normally.

Reminder: If system installation completes, want to use one key ghost software to carry on system backup also must press above operation.

The third situation and solution (this method requires relatively high professional skills, ordinary users do not recommend use, too numb)

HP DX2310MT using a Third-party encapsulation tool encapsulated clone system reboot prompts the following faulty installation CD version Win2003 also appear this fault

Windows could not start because of a computer disk hardware

Conf iguration problem

Could not read from the selected boot disk. Check boot path

and disk Hardware

Please check the Windows documentation about hardware disk

Conf iguration and your hardware reference manuals for

Additional Information