How the router connects to the router

Some netizens ask the router how to connect with the router, how to set up to normal use? Here's how to do it.

Now it's time to start talking about two ways routers connect to routers. The respective IP settings methods and steps for both routers.

Some families or some companies have more than one computer Internet or interconnection need to use routing this does not explain why, why do you want to connect routing?

A place needs to install one or several computers, there is only one network port on the wall; the computer needs to move the position; The string is more than 100 meters in length. Well, actually, these switches are done, there is no need to set the IP conflict, but the home level of the switch with the home level of the router difference that dozens of, and now many families use mobile phones, hand-held internet, change a no line by the Hiberai block, so route another route.

There are two forms of routing-routing: the first second route is used for the switch; the second is to use a new private address for downstream users (equivalent to the common line of the enterprise)

The first routing with dial-up Internet settings has been said before, and now mainly said that the second router settings.

The first way: LAN port (the first router) to connect LAN port (the second router), WLAN port is not set up, turn off the DHCP service (wireless connection can be used normally). To facilitate the management of IP that can set LAN port IP as the first route and not within its network pool of DHCP, such as the first route lanip:192.168.1.1, the child mask: 255.255.255.0,dhcp pool 192.168.1.100-- 200, the second route lanip:192.168.1.2, the child mask: 255.255.255.0; If the second route Lanip is set to 192.168.2.1, it cannot be accessed between the two.

The second mode of connection: LAN port (first router) access to the WLAN port (the first router), WLAN port is set to dynamic IP access (note that the first router's DHCP service to open); If set to static IP then must select a 192.168.1.2 to 192.168.1.254 IP and as a senior network management should be on the first router DHCP static IP plus the IP to prevent IP conflicts. To facilitate mutual visits, we set two IP pools to the same network segment.

Either way, the IP of the two routers LAN should not be the same.

About when to choose which connection method please look at two routes after the network segment, can not share the reasons and analysis of the exchange, the following is the brand's default gateway IP address and username password.

D-link 192.168.0.1

Tp-link 192.168.1.1

Linksys 192.168.1.1

3Com 192.168.2.1

NETGEAR 192.168.1.1 Admin Password

Huawei 192.168.1.1

Alpha 193.168.18.1

Shenzhou Digital 192.168.1.1