How the tp842+ router sets up the admin WiFi

tp842+ router settings manage WiFi first step, host network Settings

If you only need to modify the wireless name and password for the current router, set it as follows

Login Admin interface, click on wireless settings in common settings, as shown below.

Modify the wireless name and wireless password, click Save, set to take effect immediately. The following figure.

1, into the wireless settings

Click Advanced Settings to enter the Setup interface, as shown below.

Click on the wireless Settings >> host network, as shown below.

2, host wireless network settings

Here you can modify the wireless name, password, or set the wireless channel, signal strength.

NOTE: When AP isolation is turned on, all wireless clients are inaccessible to each other.

tp842+ Router settings Manage WiFi second step, guest network settings

1, click on wireless Settings >> Visitors Network, as shown below.

Guest Network: A wireless network that is available to guests, setting the permissions, speed, and opening hours of the wireless network.

2, open the network of visitors

3, set up a visitor network

You can modify the name of the guest network, encrypt it, or set the guest network access to the internal network to set the maximum rate limit for the Guest network terminal.

Guest network opening hours can be set according to actual requirements. The following figure.

At this point, the wireless settings are complete to manage the devices connected to the visiting network in common settings >> connection device management, as shown below.