Tplink router to set up a switch method
Connect the settings computer to the tl-wr841n LAN port to ensure that the computer automatically obtains the IP address and DNS server address.
Note: To avoid IP conflicts or DHCP server conflicts, do not connect tl-wr841n to the front-end network.
Modify SSID (wireless name)
Login Router Admin interface, enter wireless settings >> basic settings, modify SSID, click Save.
Set Wireless password
Go to Wireless Settings >> wireless security settings. Select Wpa-psk/wpa2-psk, fill in no less than 8-bit PSK password (wireless password). When the settings are complete, click the bottom save button.
In the router management interface DHCP server >> DHCP service, select the DHCP server as not enabled and click Save.
Modify Management IP
In network parameters >> LAN port settings, modify the IP address and the main router is not the same (it is recommended to set the IP address and the main route the same network segment). Settings Complete Click Save.
Reboot the Router
Eject the Restart dialog box, click OK, and wait for reboot to complete.
7 The tl-wr841n LAN port (that is, the 1~4 interface) is connected to the LAN port (or LAN switch) of the front-end router according to the application topology map.
So tl-wr841n when the wireless switch (wireless AP) has been set up, the wireless terminal can connect to the tl-wr841n wireless internet.