How the tplink886n router sets

tplink886n Router Setup method

Tp-link tl-wr886n Wireless Router

Step one, tl-wr886n router installation

1, telephone line Internet: Please prepare 2 short network cable, a network cable used to connect ADSL Modem (cat) and tenda/' target= ' _blank ' > Tengda tl-wr886n

A WAN interface for a router, and another network cable to connect to any LAN (1/2/3/4) on the Tengda tl-wr886n router

Mouth and computer.

Router installation when the phone line is online

2, Optical brazing: Please prepare 2 network cable, a network cable used to connect the light cat and Tengda tl-wr886n Router WAN interface;

Another network cable is used to connect any LAN (1/2/3/4) interface and computer on the Tengda tl-wr886n router.

The installation method of the router in the light-brazing network

3, Internet network: Please prepare 1 network cable, the first broadband operators to provide access to the household network cable in Tengda tl-wr886n routing

The WAN interface of the device, and then the network cable that you have prepared, connected to the computer, the other end connected to the Tengda tl-wr886n router

Any one of the LAN (1/2/3/4) interfaces on the.

Router Installation when Internet network

Note the problem:

(1), Tengda tl-wr886n Wireless router installation is successful, the SYS indicator on the device flashing, WAN interface will often light or

Flashes, 1/2/3/4 ports are often bright or blinking on a computer-connected port.

(2), the user please according to own broadband access way, according to the method described above, installs your tl-wr886n router.

Step two: Set the computer IP address

This example takes a Windows XP system demo, and Windows 7 and Windows 8 users read the article: Computer dynamic IP Address setting method.

1, right click on "Network Neighborhood"--> Click "Properties"

XP Network Neighborhood Properties

2, the mouse right click "Local Connection"-> Click "Properties"

XP computer Local Connection properties

3, the mouse double click Internet Protocol (TCP/IP)

XP system under Local connection properties select TCP/IP

4, select "Automatically obtain IP address" and "Automatically obtain DNS server address"--> click "OK".

XP system settings to automatically obtain IP address

PS: If the computer is a static IP address before the Internet, please record the computer IP, gateway, subnet mask, DNS information, and then set to automatically obtain, the following figure.

View and record static IP addresses on a computer

Step three, tl-wr886n router Internet settings

1, Login Settings interface: Run the browser on the computer, in the browser's address bar input tplogin.cn and then press ENTER

Key, a dialog box pops up. tplogin.cn not open? Click to read: tplogin.cn not open solution

Enter tplogin.cn in Browser

2, set the login password: The first time to log on to the TL-WR882N router, users need to manually set a login password;

Set password "box, set the admin password--> and enter--> Click OK again in" Confirm password ".

Set tl-wr886n login Password

Note: If you have set up your admin password, a dialog box will pop up directly to enter the password, and the user only needs to enter

Set a good password to log on.

3, Run the Setup Wizard: Enter the password to login, the router will automatically eject the Settings Wizard interface, if no pop-up

, you can click the Setup Wizard on the left menu to run it.

The Setup Wizard for the tl-wr886n router

4, choose the way of surfing the Internet: Here you can see a total of 4 options, respectively: "Let the router automatically choose the way to access the Internet"

, "PPPoE (ADSL virtual dial-up)", "Dynamic IP (Ethernet broadband, automatically from the service provider to obtain the IP address)", "Static

State IP (Ethernet broadband, network service provider to provide fixed IP address) ". How to choose the way to surf the internet?

Fine introduction.

Three ways to surf the tl-wr886n router

(1), ADSL dial: At present, more than 90% of the broadband users are "ADSL dial-up" Internet access, for "ADSL dial-up" broadband services, broadband operators to provide a broadband user name, broadband password to the user; When you are not using a router, you need to dial the Internet through a "broadband connection" on your computer.

ADSL dial-up Internet settings: Select "PPPoE (ADSL virtual dial)"--> click "Next"

Select ADSL dial-up internet on tl-wr886n router

Input broadband operators to provide broadband account number and password--> click "Next".

Fill in the broadband username and broadband password

(2), dynamic IP: That is, dynamic IP (DHCP access to IP), handling the "dynamic IP" internet broadband business users, wide

With the operator to provide a network cable to the user's home; When you are not using a router, you simply plug the network cable into your computer,

And the computer's IP address set to automatically get, the computer will be able to access the Internet.

Dynamic IP Settings: Select "Dynamic IP (Ethernet broadband, automatically obtain IP address from the service provider)"--> click "Next".

Choose dynamic IP address for Internet access on tl-wr886n router

(3), static IP: For the "Static IP" internet broadband business users, broadband operators to provide a cable to the user

Home, it also provides an IP address, subnet mask, gateway, 2 DNS server addresses to the user; not using the road

By the time of the device, simply plug the network cable into the computer and set the IP address on the computer based on the IP address information provided.

View and record static IP addresses on a computer

Static IP Internet settings: Select "Static IP (Ethernet broadband, network service provider fixed IP address)"--> Click "

Next. "

Choose static IP Internet access on tl-wr886n router

Fill in the operator's assigned IP address, subnet mask, gateway, and DNS server address--> click Next.

static IP Internet setting on tl-wr886n router

6, configure the wireless network: "SSID" that is, the wireless network name, users according to their own needs to set--> tick

Wpa-psk/wpa2-psk "--> set" PSK password "--> click" Next ".

Set up a wireless network on the tl-wr886n router

7, restart the router: click "Reboot"--> in the pop-up dialog box click "OK".

tl-wr886n Router Internet Setup complete

8, restart the completion, login to the Tp-link tl-wr882n wireless router settings interface, click "Running state"

--> View the "WAN status", if the display has obtained information such as IP address, as shown in the following figure, the expression is set to

Work, can be normal Internet.

Check that the tl-wr886n router settings are successful

Note the problem:

(1), the Internet mode do not choose "Let the router automatically choose the Internet Way", routers often identify inaccurate, resulting in the Internet.

(2), "PPPoE (ADSL virtual dial-up)", "Dynamic IP", "Static IP" three kinds of Internet access, based on your broadband business type to choose, not correct, is not able to access the Internet; If according to the above introduction, you still can not judge your own way of surfing the internet, Please call your broadband operator for more information and make sure you have a choice.

(3), because the software (firmware) version of the router is different, the settings and this article may be slightly different, but not too big.