How to achieve shared Internet access under Windows 8

Share the Internet by sharing a local connection (wired, wireless)

Note: Confirm that the computer that shares the local connection is the gateway computer has two network cards (one of which is a wired or wireless network card), and has a switch or hub and other networking equipment, computers and computers through network equipment or wireless LAN connection.

First, configure the gateway computer

1, to open the properties of one of the network connections, you must ensure that this network connection can be connected to the Internet normally. The following is an example of a local connection, as shown below:

2, click the Sharing tab, and then select the Allow other network users to connect through this computer's Internet connection check box, and point to exit.

Note: If you have only one network card, the Sharing tab will not be available.

3, set the local connection after the completion of the local connection icon will appear on the shared flag, the following figure:

4, after the completion of the local connection settings, another network card (wired, wireless) IP address has been manually designated by the system, the following figure:

　　Second, configure the client computer

1, open the client computer network connection properties, the following figure:

2. Double-click Internet Protocol (TCP/IP) on the image above to open the Internet Protocol (TCP/IP) Properties window and select "Get IP address automatically" and click "OK" to exit.

At this point, the client setup is complete, you can realize sharing the Internet.