How to add a RAID driver to WinPE

How do I add a RAID card driver to a WinPE? Here are some tips for you to take care of.

1, first find Winpe.is_ file, directly change it to Winpe.cab, and then use WinRAR decompression, will find in fact is an ISO, such as: Winpe.iso.

2, find your RAID card driver, generally there is an INF, a sys and a DLL file, and what the Readme and so on, we just need that sys on the line, For example, call Xxxsata.sys, pack it into a CAB file with Wincab, and then change the cab to Xxxsata.sy_, and then use UltraISO to get the file into the ISO file SYSTEM32 inside the drivers inside, Maybe the PE system is different, you look for the ISO inside which directory there is a pile of sy_ such documents on the line.

3, with UltraISO in the ISO file found in the legendary Txtsetup.si_ file, generally in the root directory, also do not rule out the SYSTEM32 or drivers inside, extracted it out, changed to CAB files, Unzip the Txtsetup.sif file, is the Windows Preinstallation Environment load driver configuration file Oh!

4, with UltraEdit edit this file, add your driving information to the line, with the previous said Xxxsata only ghosts know the existence or not SATA card as an example, in the [SCSI] segment Increase xxxsata = "XXX SATA CONTROLLER"

In fact, this is just a name, it represents the Windows Preinstallation Environment loading, the display of "loading xxxx driver" that thing. Then in [SCSI. Load] Segment Increase xxxsata = xxxsata.sys,4

This is the hang drive, some people ask is not compressed into the CAB format of the Sy_ file? In fact, the program itself know to analyze the decompression, as long as the consistency of the name to keep the line. Then it's a bit more complicated. Add pciven_105a&dev_3373 = "Xxxsata" in the [HardwareIdsdatabase] section

The number above the PCI back number do not copy the above, this is just for example, if you copy the above paragraph, your PE will prepare a blue screen bar! This number is found in your driver INF file, absolutely. own research and research. Then add Xxxsata.sys = 1,,,,,, 4_,4,1 in the [SourceDisksFiles] segment 1,4

After completion, the SIF file with Wincab compressed into the CAB format, changed to Si_ suffix name, and then added to the ISO file with UltraISO to replace the previous Si_ file, but it is best to back up first.

Note: The PE hanging drive is installed on the hard drive in the same way. In fact, no matter what version of the PE, as long as it is based on the Windows Preinstallation Environment, you can refer to the above method of hanging raid card driver. Everyone can extrapolate!