Tip:
This solution is only applicable to Intel chipset models, and AMD chipset models cannot be used.
The document states that the Windows 32-bit system is supported, but some 32-bit systems may have problems. We recommend that you install Windows 64-bit systems.
1. Visit the Intel official website
Download the Windows 7 USB3.0 Creator utility;
2. Use Windows 7 usb dvd Download Tool or UltraISO to create the original Win7 installation disk (do not use the ghost image to make it; otherwise, an error will be reported later );
3. Extract the downloaded software from the archive. Run installer_creator.exe on the right of the decompressed software;
4. Click the select button on the right of the page to select the partition where the USB flash drive is located;
5. Click Create Image to start adding a program to the USB flash drive. The process will be long. The official Intel data is 15 minutes, and the actual measurement is over 20 minutes;
6. Update finished! appears! After the USB flash drive is created, you can use the USB flash drive to install the system on the USB 3.0 interface.
The system USB driver is automatically installed after the patch is installed on the USB flash drive.