How to build the setup six program in the Linux system on the hard drive

Article Title: how to build a Linux system's setup six program on a hard drive. Linux is a technology channel of the IT lab in China. Includes basic categories such as desktop applications, Linux system management, kernel research, embedded systems, and open source.
The installation of Slackware Linux can be roughly divided into six steps. In fact, these steps
In this case, the color installation screen is clearly displayed.
Yes. The following six steps can be consistent, but can be performed independently.
　　
1. start SWAP PARTITION
Unless there is no available partition in your hard drive, it is recommended that you first
Set swap partition so that the virtual memory required by the system takes effect immediately.
It is especially important for machines with small memory. Otherwise, you may not be able to continue the installation.
Work.
　　
2. specify the Target partition for installation)
The second step is to tell the system installer where you want to install the system
One or more hard drive partitions. When you perform this step, you only need
Move the Target option to the screen and press the key to answer some questions.
You can.
　　
3. specify the installation Source)
First, tell the installer how you want to install it, for example, Disk II.
Hard disk ⅱ CD-ROM II network remote an NFS server or tape, etc. this is
Installation source. When performing the operation, you can
And then specify the Source. Alternatively, you can select the Source option on the screen.
.
　　
4. select disk sets)
When performing this operation, we first need to choose which software to install or which ones are disturbing.
Installation.
　　
5. Install)
This step is the process of installing the software from Source to Target.
　　
6. last system Configuration)
　　
After completing the preceding five steps, basically all the software required by the system has been installed.
However, this is still a dead system, because most of the functions have not yet been implemented.
The method works correctly. why? we need to make the final settings further. This step is implemented
The practice is to answer some questions, and the software will be automatically executed later.