How to cancel computer boot blue screen hard drive self test?

A lot of people have come across a computer. Displays the screen self test image, as shown in the following figure. This is because our computer's hard disk data problems, the last abnormal shutdown, the system can not guarantee its normal service, so need post.

Why is this happening?

1. The computer suddenly loses power when working

The most afraid of the computer is working suddenly power off, this will not only make unsaved data loss, resulting in system file read and write errors, but also damage the hard drive, serious will cause the next time the boot can not be normal access to the system. Most of the time when a sudden power outage, the Blue self-test screen will appear.

2, abnormal shutdown or reboot

Some people if the computer card is dead or slow, will be directly on the reset computer reset machine, but this button can only be used in key times (such as blue screen). Many times the reset key to restart the computer may also appear self-test screen, and even the system crashes.

3, the hard drive failed

Maybe the hard drive is going to go bad and the system will test itself every time. It is also possible that the hard drive line contact is not good or hard disk file system errors and so on.

How to solve?

Many tutorials are to modify the registry skip Self test, I suggest that we do not do so, purely to deceive.

To fundamentally solve this problem, first find out why the self-test is. Make sure it doesn't happen again.

Many office computers why it is easy to self-test, because the staff do not cherish the computer, causing the computer many times abnormal shutdown or restart. So be sure to ensure that the computer in a stable power supply, and eliminate reset hard reboot, or directly unplug the operation of the power.

Then when we encounter the self-test, we can manually skip the self-test by pressing space key immediately, then enter the system to manually select the appropriate time self-test.

In idle time, we select the C-Disk property ==> tool ==> Check the disk as shown in the figure above. Click Start to check the hard drive. Sometimes it is necessary to reboot the computer for self test, then we'd better wait for the computer self-test to be completed next time. and to standardize the computer operation, cherish the computer, to ensure the stable operation of the system.