How to change the hard disk of the notebook computer?

In the notebook internal hardware, hard disk, optical drive and other hardware is the most prone to failure, in the author has used 3 of notebooks, 2 are the first hard drive is broken. Notebook hard drive broken down how to do? I believe a lot of friends will choose to take to repair, in fact, small series think that completely do not need to change their own notebook hard disk is very simple, the following is a notebook for hard drive method steps, interested friends to see.

　　Step one: Get a new laptop hard drive.

The notebook uses a 2.5-inch hard drive, which is the same size as a solid-state drive, smaller than a desktop hard drive. If you have trouble with a laptop hard drive, you might as well buy a new 2.5-inch laptop hard drive back online or in the computer city. In addition, if your notebook supports the SATA3.0 interface, we can also change to a solid-state drive.

　　Step Two: Remove the bottom of the notebook back cover

Notebook to change the hard drive, the most difficult is the demolition machine after the shell, but most of the top of the notebook is better to remove the lid, the basic is to use a Phillips screwdriver, remove the bottom fixing screws, and then open the bottom cover can see the internal hard drive.

In addition, some notebooks removed after the cover more trouble, such as Lenovo Z400, Z500 notebook disassembly after the door also need to remove the keyboard, the difficulty is relatively large.

　　Step three: Notebook to change the hard disk method

1, open the bottom of the notebook after the lid, we can easily find the notebook internal hard disk, its fixed on the motherboard, we first remove the fixed screws, and then the parallel from the hard disk interface can be extracted, as shown in the following figure.

2, remove the notebook hard drive, we can see that the hard disk is also a frame fixed, we again remove the fixed screws on the shelves, then you can remove the hard drive, as shown in the following figure.

3. Next, we will install the new hard disk into this retention frame and install the fixing screws as shown in the following figure.

4, and then the hard drive reinsert into the hard disk interface, and then the fixed screws to the installation, you can complete the hard drive replacement, as shown in the following figure.

The final thing is to reinstall the back cover of the notebook. Generally speaking, the notebook to change the hard disk is very simple, small white friends can easily learn. For some of the more difficult to disassemble the notebook, small series suggested that little white friends do not violent demolition, suggest a master help or take to repair.