How to check your computer hard drive is damaged?

How to check your computer hard drive is damaged?  ?

Part one: Physical Bad way

1, when the computer is often jammed and hard drive lights on a long time, it is necessary to consider whether the hard drive has a bad road. We use the Diskgenius software to detect and repair.

2, open the software, click on the "Hard" menu "bad track detection and repair"

3, click "Select Hard Drive", confirm to check bad road hard disk model, capacity and other information, select Good after click OK. If you have only one hard drive in your computer, you can skip this step.

4, the default check "read detection" can be, click "Start Detection", the software began to check whether the hard drive has a bad track. The time consuming column indicates the read speed of a sector on the hard drive. The whole process may take hours, and if there is a bad word, click "Try to repair" to fix the bad. Please make a backup file before repairing To prevent unnecessary losses.

Part two: Logical bad way

1, the logical bad way refers to the physical damage, such as bad files, bad directory structure, bad partition table, etc., you can use Windows own software to repair.

2, open My Computer, on the disk to check the right button-properties, open the Properties panel

3, click the "tool", click on the wrong column of the "Start check"

4. Select "Automatically repair file system errors", "scan and attempt to restore bad sector", click "Start", the software will be automatically detected in the next boot file system and repair. If you are a non-system disk, you can detect repairs under windows after you force the unmount of the volume.

Note:

1, if found that the hard disk has a large area of physical bad, and there is no backup inside the important information, remember not to write anything to the hard disk, preferably to the professionals to deal with, lest cause loss.