Notebook keyboard First analysis if the surface of your keyboard debris dirt, this cleaning method is very simple. First off the laptop, shut down and then use a clean soft cloth to damp a bit to wipe the keyboard surface, but not too wet. Or the water will go inside. Or go to some computer city to buy a bottle of computer detergent, generally also a few dollars. Then clean the surface directly with the detergent method.
Of course, if your notebook keyboard is a gap between the keyboard needs to be cleaned, then you can use a brush to clean up, the brush to be as weak as possible. or damage the keyboard is not good, of course, it is best to go to the computer city to buy a dedicated USB keyboard vacuum cleaner, half the price of 10 a few dollars. This will absorb dust and dirt, and will not damage the notebook keyboard.
Finally, if the dirt can not be cleared with the depths of the gap, and notebook keyboard key cap is not easy to open, so how to clean it?
Computer knowledge
1, the first to the notebook keyboard internal structure is very understanding, notebook keyboard is the X-frame, it is two pieces of support frame of the lower end are fixed on the keyboard backplane, one can slide along the fixed card groove, one can rotate around the fixed axis, the upper end of the structure and the lower end is the same, we press the keyboard, Two parallel four-bar structure of the support frame forced to run downward pressure, so the force is more evenly, press up to feel, if the force is uneven, press down the crooked, it is not comfortable. Know the structure of the notebook keyboard, then we began to remove the key cap, in general, the support frame and the key cap connected to the rotatable part of the key cap, ESC key is on the right, the space bar is the top. But also do not rule out the different parts of the brand is also different. First of all, to the upper end of the rotatable hands, because we can directly through this part of the force to open it, and will not cause damage to the notebook keyboard, damage the keyboard. After the opening, you can use the USB vacuum cleaner to clean the keyboard.
2, after the final cleaning, there are some residual moisture on the keyboard, such as water drying can be turned on the computer, if the user is anxious to use the computer, you can use the cold air blower to blow open. And then the removal of the key cap of the parts installed back, directly to the upper end of the sliding part of the card into the key cap card groove, and then gently down the key cap, feel the key cap was stuck in the can.