How to configure a wireless network under Windows 8

How to configure a wireless network using Windows system

1, first open your notebook wireless network card switch, Lenovo notebook most can be fn+f5 (or F4) by the shortcut key to open.

2, click the lower right corner of the taskbar "Network" icon, will be in the right-hand column list of the search to the wireless network, select the wireless SSID you want to connect the name, click on the connection;

3, if the wireless network turned off the broadcast function, in the right column of the wireless network list does not appear, you can choose to manually add the wireless network. In set up a connection or network, select manually connect to a wireless network, and enter the information you want to add to the wireless network, as shown in the figure:

4, if your wireless network with DHCP assigned Ip,windows 8 system will automatically get to the IP from the router, connected to the network. If you need to specify the TCP/IP parameters manually set the fixed IP address, you need to click on the left side of the change adapter settings, manually enter the specified IP address information.

How the ThinkPad model uses access connections to configure a wireless network

1. Enable wireless network card: Please confirm that the driver of the wireless network card is installed correctly, and turn on the wireless network card antenna switch. Lenovo notebooks are mostly fn+f5 (or F4) open, as shown in the picture:

2, click "Start"---"All Programs"---"ThinkVantage"---"accessconnections"---"Find WiFi" to find wireless networks;

3, the "Find wireless network" window will open, if there is a wireless network can be found in the area, you can see in this window.

4, select Good to connect the wireless network, with the left mouse button click, and then point to the lower right corner of the "connection." In general, if the wireless network to be connected is encrypted, it will pop up configuration prompts, such as the figure, click "Yes" at this time;

5. In the Edit Location Profile window, in the Wireless Settings tab, in the Wireless security type, select the encryption type of the wireless network you want to connect to;

6, choose a good encryption type, and then click "Properties", in the encryption settings, we choose the specific encryption parameters, as well as set the password; (The choice here is to be configured for the wireless network you need to connect to, if you are not sure about the encryption type and password of the wireless network you want to connect to, please contact the person who manages the wireless network.) )

7, if you want to boot every time, automatically connect to the wireless network, the next map location tick, and then click OK.

8, back to the Edit Position Profile window, click OK. (If you are not automatically getting an IP address and you want to set more advanced options such as fixed IP addresses, click the "Other Settings" tab to set it)

9, Accessconnections began to connect the wireless network

10, after the successful connection, the system prompts you, whether to save the profile, please click "Yes".

11, generally speaking, you will be able to surf the Internet at this time.