If you have installed Windows 8, the following describes how to configure and install a vro for win8, which is similar to Windows 7. First, connect the cables according to the instructions. First open the network on the computer, and then click -- properties, then, click IE/Chrome/Firefox and enter 192.168.1.1 in the address bar of the browser to enter the settings page (reset if it cannot be opened, and detailed instructions are provided in the Manual ), most routing devices use this IP address (now many optical fiber cats may use different bandwidth ). Enter the user name and password. The default user name is admin and the password is admin. This is the router settings page. Set MAC address filtering. The future is to support the MAS address filtering function. The password is relative to a wireless route. If you have a wired connection, you do not need to enable the wireless function.
After completing the above steps, the vro cannot be stolen (most of the stolen networks and the network is over). If you have to set wireless connection, enter 192.168.1.1 or 192.168.0.1 to enter the login interface, the default account and password are both admin (You are advised to modify them ). Go in and find wireless setup to log on to the page. After the setting is complete, it will usually restart and be OK in one minute.