How to configure Wireless Network Relay

Source: Internet
Author: User

For the use of wireless networks, we often encounter various problems. How should we solve them? What should I do?

We have introduced an article about the wireless relay function to prevent Internet piracy. However, you must note that not all products have the relay function. So how can we effectively combine hardware and software to implement the relay function? Next we will introduce the content of Wireless Network Relay Settings.

Of course, not all wireless devices can achieve the purpose of Wireless Network Relay Settings and amplification function, which requires the combination of powerful firmware program, the routing device used by the author has refreshed the DD-WRT V24 firmware, this version of firmware provides us with a client-based wireless connection, through which we can implement wireless network signal relay.

Step 1 of Wireless Network Relay Settings: Use the wireless signal scanning tool on the laptop that connects to the wireless network adapter to scan the strongest signal at home, after confirming that the signal at a certain location is the strongest, it is best to put the relay device here.

WIRELESS Network Relay settings Step 2: In the DD-WRT Management Interface we find the WIRELESS label, and then select basic settings, which is set to AP by default, it provides common AP access and signal transmitting and receiving services. Because we want to use this device as a destination WIRELESS network repeater, here we will change the wireless MODE to client and the WIRELESS network mode to hybrid mixed, the wireless network name (ssid) information is added to the scanned wireless network SSID, that is, tp-link. Keep the other information by default. Then, click the SAVE button to SAVE the configuration.

Step 3 of Wireless Network Relay Settings: After the wireless mode is modified, we also need to configure the connection type of the wireless WAN Interface and return to the setup-> basic setup interface, modify the WAN connection type to the automatic retrieval mode of automatic configuration-DHCP from the drop-down menu and save the settings.

Wireless Network Relay Settings Step 4: If there is no problem, we can refresh the WAN interface to see the address information, of course, this address is actually allocated by another person's TP-LINK DHCP service, we can see that the obtained address is 192.168.1.112, the gateway address and DNS address are 192.168.1.1, this address is the management address of the TP-LINK, So we achieve the wireless signal expansion and amplification.

Step 5 of Wireless Network Relay Settings: Of course, there is still a problem that cannot be ignored, that is, the management address of our wireless router cannot conflict with the management address of the target device, for example, the management address of my device is 192.168.1.1, which cannot be modified. We need to change it to another network segment, for example, 192.168.0.1, And the DHCP service must be modified accordingly.

TIPS:

You cannot click the SAVE button when modifying the address pool and the vro management address, because the SAVE button takes effect only after the device is restarted, therefore, we need to click the apply settings button to enable these two parameters immediately.

Step 6 of Wireless Network Relay Settings: After the storage is complete, we implement the relay and amplification functions of the wireless network. Other people's wireless networks are successfully introduced into our own homes, our wireless router has the INTERNET access function, all network packets are sent from the wireless network to the destination network of the TP-LINK wireless router, and then further connect to the INTERNET.

TIPS:

Because our local wireless router only provides the relay service, ping 192.168.0.1 (the management address of the local wireless router) on the connected device, however, if you want to ping 192.168.1.1 (the management address of the wireless router in the destination network), you cannot connect. Therefore, the ping method cannot be used to detect network connectivity.

With this relay configuration, we can connect computers without wireless NICs to the common LAN Ethernet interface of the local relay wireless router through the network cable, this allows computers without wireless NICs to access the internet through wireless networks for surfing.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.