How to configure wireless networks in Vista

This article describes in detail how to set up a wireless network and provides illustrations. I believe this article will help you set up a wireless network under VISTA. The following describes how to explain it.

If you use an unencrypted "seu-wlan-web" service when using a wireless network in the Vista system, the configuration method is as follows:
1. Open the Wireless Network Connection Properties window, select "Internet Protocol version 4TCP/IPV4)", and click "properties.
2. select "automatically obtain IP Address", select "Use the following DNS server address", and enter "58.192.112.11" in "preferred DNS server ", enter "202.119.24.12" in "backup DNS server ".
After the connection is successful, you must open your browser and enter any internal website address. The system automatically jumps to the wireless network authentication page and enter the user name,
Password Before connecting to the network, and then use the B-RAS to connect to the Internet.
 
The method for configuring "seu-wlan" is as follows:
1. Select "manage wireless networks" in "Control Panel" and click "add"

2. Because we need to manually set some parameters, select "manually create network configuration file"

3. Configure as shown in the following figure. Enter "seu-wlan" for the network name, "WPA-enterprise" for the security type, and "TKIP" for the encryption type"

4. Next, we need to change some network connection attributes and select "change connection settings"

5. Select "protected EAP (PEAP)" in "select network authentication method", and click "set" next to it:

6. deselect the verify server certificate check box, confirm the Select security password (EAP-MSCHAP v2) Selection in select authentication method, and click the configuration button below:

7. Cancel the "automatically use Windows login name and password" check box

8. After selecting "seu-wlan" in the network connection, the system prompts you to enter the user name and password, as shown in. (@ A or @ B is not required after the user name ). If you want

If you want the system to save the password, select the "save user name and password for future use" check box.