How to configure the WiFi module for the iTOP-4412 Development Board Linux System

Elite Edition in Linux under Use WiFi , the following configuration is required:

First, the user to see the CD in the CD after the"Linux"--"root_xxxxxxxx.tar.gz" File, where the

"xxxxxxxx "  Representative linux system version Date,  Schindler provides support for linux under wifi system version is   " root_20150422.tar.gz " ,

That is, 2015-04-22 later versions (including 20150422) are supported for WiFi modules.

Plug in the wifi module, launch the Development Board into the uboot command line, and use The support provided by the FastBoot burning disc wiif The Linux image of the module is on the Development Board, and after the burn-write is completed , reboot the board into the Linux file system, such as:

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6D/6E/wKiom1VkC5jCJCYHAABF2v3kibY427.jpg "style=" float: none; "Title=" 4412 Development Board Linux "alt=" Wkiom1vkc5jcjcyhaabf2v3kiby427.jpg "/>

Then enter in the serial port:wpa_passphrase tp-link_65e546 "aaaaaaaa" >>/etc/wpa_supplicant.conf, where

"tp-link_65e546" is the name of the wireless network, "aaaaaaaa" is the password of the wireless network, you need to set these two places according to your own network, as shown in:

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/6D/69/wKioL1VkDSfC7KSgAAB0v3NOtZI277.jpg "title=" 4412 Development Board Linux "style=" Float:none; "alt=" wkiol1vkdsfc7ksgaab0v3notzi277.jpg "/>

Then execute: "/etc/init.d/mt6620" command, run the result as shown:

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/6D/6E/wKiom1VkC5rg-UMcAAIkYYhF2GI876.jpg "title=" 4412 Development Board Linux "style=" Float:none; "alt=" wkiom1vkc5rg-umcaaikyyhf2gi876.jpg "/>

Once the above command is complete, enter the ifconfig command to see that WiFi is already connected, as shown in:

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/6D/69/wKioL1VkDSuRMtZtAAK8AMzd_l4120.jpg "title=" 4412 Development Board Linux "style=" Float:none; "alt=" wkiol1vkdsurmtztaak8amzd_l4120.jpg "/>

We can enter:ping www.baidu.com, to test the test results as shown:

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/6D/6E/wKiom1VkC52xtUH2AAGv6MIG6nI317.jpg "title=" 4412 Development Board Linux "style=" Float:none; "alt=" wkiom1vkc52xtuh2aagv6mig6ni317.jpg "/>

You can see the ping Baidu through, the Linux system under the wifi module configuration is complete.

How to configure the WiFi module for the iTOP-4412 Development Board Linux System