How to configure the Telnet service for the WINDOWS10 system

Normally, the Telnet service for the WINDOWS10 version of the system is turned off and needs to be opened manually. The Telnet service can debug the port, and its importance is not negligible. Today, the System City Small compilation teaches you how to configure the Telnet service.

Specific as follows:

1. Click on the Start menu and click on the "Control Panel" option in the list.

2. Next, the Control Panel window pops up in the interface. Click the "Programs" option in the window.

3. In "Options and features" There are "uninstaller", "View installed Updates" and some other options, click on the "Enable or disable Windows features."

4, the panel display is the function of Windows, you can set the Enable and shutdown features. Find "Telnet client", tick and click "OK" button below.

5. After that, right-click on the Start menu and select the "Run" option in the list.

6. Enter "cmd" in the Input box and click the "OK" button.

7. Enter the Telnet command to see if the command can be used properly. Enter the command as shown, after the input is complete, press the ENTER key to be able.

8, small part of the test is not normal operation, the reason may be that the Telnet service is not turned on. Right-click on the Start menu and click on "Computer Management" in the options.

9. In the interface, pop up the "Computer Management" Panel and click on the "Services and Applications" option in the list on the left.

10. Click on the "Services" option on the right side of the screen.

11, can see in the interface Service program name, description, status, startup type and other information. Locate the Telnet program, and right-click and select the Properties option.

12. In the property settings panel, set the startup type to Automatic, then click "Start" in "Service status" to complete the configuration.

The WINDOWS10 system configures the Telnet service method to introduce you here. Methods are not complex, with the same needs of friends, can try to look at the operation!

How to configure the Telnet service for the WINDOWS10 system