How to configure the Windows Mobile simulator to access the Internet

Kge: This article is the most useful online simulator setting article. We recommend that you add it to favorites :)

 

From http://blog.csdn.net/yanyouning/

 

 

This article describes how to configure the network settings of the Pocket PC 2003 se device simulator in six steps:

1. Download the virtual NIC Driver
2. Install the virtual NIC driver on the PC
3. Configure the simulator startup parameters in Visual Studio 2005
4. Configure the NIC parameters of the Pocket PC 2003 se device Simulator
5. Configure Pocket PC 2003 se device simulator virtual Nic binding
6. It is required that you soft-start the simulator once after configuration, and then test whether the network configuration of the simulator is successful.

 

Step 1To download the virtual NIC Driver. Microsoft official: http://www.microsoft.com/downloads/details.aspx? Familyid = dc8332d6-565f-4a57-be8c-1d4718d3af65 & amp; displaylang = EN, the downloaded file is netsvwrap. MSI. You can also install drivers in the English version.

Step 2To install the virtual NIC driver on the PC. After the virtual NIC Driver is successfully installed, you can see the virtual Nic in the Local Network Connection Properties dialog box. 1.

Figure 1

 

Step 3You must configure the parameters of the simulator in Visual Studio 2005. Start Visual Studio 2005, select "tool->" from the menu, and select "device tool-> device" on the left of the displayed "devices" dialog box, select "Pocket PC 2003 se simulation program" in the simulator list on the right, as shown in figure 2. Then, click the Properties button in Figure 2 To Go To The simulator configuration page, as shown in figure 3. Select "TCP connection transmission" in the "transmission (r)" drop-down box in figure 3 ". Finally, click the "simulation program properties" dialog box, as shown in figure 4. In Figure 4, click the network tab, select the "enable ne2000 PCMCIA network adapter and bind to" option on the tab, and select the drop-down list item corresponding to "Virtual Machine network services Driver.

Figure 2

Figure 3

 

 

Figure 4

 

 

Step 4To configure the parameters of the Pocket PC 2003 se simulator. Start the Pocket PC 2003 se simulator. In the simulator, Select Start> set> connection> Nic To Go To The NIC configuration page, as shown in Figure 5. Click "ne2000 Compatible Ethernet driver" in Figure 5. The NIC configuration page shown in Figure 6 is displayed. The specific Nic configuration is also shown in figure 6. 192.168.0.1 is the IP address of the LAN router, and 192.168.0.10 is the IP address of the PC running the simulator.

Figure 5

 

 

Figure 6

 

 

Step 5, You still need to configure the Pocket PC 2003 se simulator parameters. In the simulator window, select File> configuration. The "simulation program properties" dialog box is displayed, as shown in figure 7. Click the network tab in Figure 7 and select the "enable ne2000 PCMCIA network adapter and bind to" option on the tab.

Figure 7

 

 

Step 6, You need to soft-start the simulator once after configuration, and then test whether the network configuration of the simulator is successful. In the simulator window, select File> Reset> soft (s) and soft-start simulator. After the simulator is started, we can test whether the IP address of the simulator is configured successfully in the CMD command line window. The test result is shown in figure 8.

Figure 8

 

 

Supplement: This method is also applicable to the network configuration of the Windows Mobile 5.0 simulator.