How to connect to a network printer in win7

How to connect to a network printer in win7

The company recently rented a Konica Minolta C250 network printer to connect, and the boss also had a laptop. When connecting to the printer, pay attention to some details to connect to the printer normally.

Ensure that the printer is connected to the network normally. First, Test 1. Enter the IP address of the ping network printer at the command prompt]

Connect to the network printer after the network test is complete. Click Start> devices and printers]

Then click Add Printer

Select Add network, wireless or Bluetooth printer]

Go to [searching for available printers ]. It takes a long time to search here, So we suggest you click [even if the printer is not in the list]

Under "Search for printers by name or TCP/IP address", click "Add Printer by TCP/IP address or host name]

Enter the printer host name or IP address and click Next step]

[Additional port information required] we recommend that you use the default port. [next step]

Install the printer driver. Use [install from disk] to find the driver location of the bizhub C250 in the mud Konica Meida.

Confirm that the driver is correct. Click [next step]

The printer name can be changed or not changed. [Next Step]

Installing Printer Driver

After the printer driver is installed, the system prompts whether to share the printer. We recommend that you do not share it. This is a network printer.

After the network printer driver is installed, you will be prompted whether to set the printer to the default printer ---------- [select as needed, if necessary ]. After the driver is successfully installed, we recommend that you click Print test page to print it properly without any garbled characters, indicating that the driver is normal. Complete

Click document printer.