How to convert CAXA electronic board and CAD data?

How to convert CAXA electronic board and CAD data?

To meet the requirements of cross-language and cross-platform data conversion and processing, CAXA Electronic Board 2009 supports the new development of Unicode encoding and further enhances the compatibility of autocadr12-2009 data from the underlying platform. DWG data can be directly opened, edited, modified and saved, to ensure the electronic board EXB format data and DWG, DXF format Data Direct conversion, so fully compatible with the enterprise historical data, and compatible with AutoCAD interface style and use habits, to achieve the transformation of enterprise design platform.

For CAXA electronic board and AutoCAD data format namely EXB format and DWG format conversion problem, through the following several typical scenarios are analyzed as follows:

How to troubleshoot a conversion process that prompts you to find or replace a profile

Method One: If the physical file, specify the shape file location. If there is no shape file, you can choose to cancel in the prompt dialog box, the system will use the default font instead of the converted graphics.

Find Files

Method Two: From the AutoCAD installation directory under the font directory to find or to be prompted to copy the required files to the CAXA Electronic Board installation directory under the Font folder, and then select the desired file in the font directory.

Method Three: Specifies the path of the shape file in the system configuration, and the next time the dwg/dxf file is opened, the system searches for a matching profile in the specified directory. The format file path method is as follows:

Browse folders

How to troubleshoot problems when you open a DWG/DXF file and the system prompts for a file error

Cancels the CRC check. After you perform the system Setup command, select Data interface in the list of arguments to the left of the pop-up dialog box, and remove the selection from the checkbox in the CRC check box, as shown below.

Cancel CRC check

How to solve the problem that the text, size and block can not be edited after the drawing of the electronic board is converted into AutoCAD drawings

Answer: When you save an electronic storyboard file as a dwg/dxf format file, the system defaults to save text, size, block as block form, as long as in the "Data interface" select "Size", "text", "Block" Nuclear selection box, then the corresponding part is scattered, so you can edit at will.

How to solve a large number of CAXA electronic board and AutoCAD drawings for mutual conversion problem

Answer: Use the Caxa Batch conversion function can be achieved. CAXA Electronic Board will be able to CAXA electronic board versions of the EXB files batch into AutoCAD versions of DWG/DXF files, can also be the AutoCAD version of the dwg/dxf file batch into EXB files, and set the path of conversion. The operation is as follows:

In the first step, click the dwg/dxf Batch Converter command in the file Drop-down menu to eject the Batch Converter dialog box to see that the conversion has DWG/DXF files converted to EXB files and Exb files to AutoCAD dwg/dxf files in two different ways. As shown in the following figure

DWG/DXF Batch Converter

The second step, if it is Caxa electronic drawing board drawings converted to AutoCAD drawings, select the "Exb file conversion to AutoCAD DWG/DXF file", and then click "Settings" to select the format of the conversion data, as shown in the following figure; if it is AutoCAD drawing drawings converted to Caxa electronic board, Select Convert dwg/dxf file to Exb file without the need to select a data format.

DWG/DXF format

In the third step, choose File structure mode, which is converted by file list and converted by directory structure. Conversion by file list refers to selecting files from different locations multiple times, and the converted files are placed in a target directory specified by the user. Transformation by directory structure refers to the conversion of data in the form of a directory, which converts the required files in a catalog into batches. Here, select convert by file list.

The fourth step is to select the Exb or DWG drawings that need to be converted. First set the path of the converted file, then click "Add File" or "Add Directory", select the file you want to convert, as shown in the following figure:

Loading files

If the AutoCAD drawing is converted to Caxa electronic drawing, the location of the form file should also be specified, as shown in the following figure:

Find Files

Step Fifth: Start the conversion. Click on "Start Conversion" to convert the file to be converted in the list

When the conversion is complete, the software asks if you want to continue, and you can decide whether to proceed as needed.

Caxa Electronic Tablet

If you choose Convert by directory, select the file directory directly and convert the files in the directory into batches. As shown in the following figure

How to solve the problem of defining drawing style when reading DWG/DXF drawing

When you open the dwg/dxf file, if the line style in the file has many colors, the user can make the corresponding line width according to the different colors of the line, Caxa the electronic board can open according to the color and distinguish the line width of the dwf/dxf drawing. At the same time, the system can automatically read the images inserted in the DWG file. The specific settings are as follows:

Step one: After you perform the system Setup command, select Data interface in the list of arguments to the left of the pop-up dialog box, as shown in the figure

Data interface

Step two: In the DWG Interface Settings dialog box, select Color in the line width matching drop-down list, and the system pops up as shown in the Picture dialog box. As shown in the following figure

Specify line width by color

Step three: In the dialog box, according to the line color in AutoCAD, specify the width of the line style. You can use the line width provided by the System line width Drop-down list, or you can specify a line width value by using the Custom line width option.

Specify line width by color

You can save the set parameters and load the configuration file for use the next time you print. The specific save and load operations are as follows: Click the Save Configuration button, in the Save Color Profile dialog box, specify the name of the profile and save the path, and save the configuration file. As shown in the following figure

Save Color Configuration

Click the Load Configuration button, and in the Open Color Profile dialog box, specify the name of the profile and save the path, and open the configuration file. As shown in the following figure

Load Color Configuration

How to solve the problem of information exchange between CAXA electronic board and AutoCAD

Answer: In the work exchange, often encounter needs dwg/dxf format of the drawings, electronic board can not only open dwg/dxf format file, also can output AutoCAD different versions of the dwg/dxf file.

Method: Click and select Save file in the file Drop-down menu to store in the save type by selecting multiple versions of the DWG/DXF format. Support the dwg/dxf file of AutoCAD R12 to AutoCAD 2009 to save.

Find Files