How to correctly install the HP 5200LX printer driver ?, Hp5200lx Printer Driver
Printer with N-plus HP installed, USB interface, network printing, and serial port. This time, HP LaserJet 5200Lx, which needs to be switched to another tool after installation, the problem is that the port after the printer is installed is Generic IEEE 1284.4 printing support. At first glance, I thought about the 1394 Interface, so I didn't care. When I installed the test page, I began to struggle, printing a K test page was a little slow because it was used to print A3 engineering drawings, this speed is not killing people ..????? After research, we found that the printer needs to switch to the interface to maintain normal printing speed.
Click "start"> "Settings"> "Control Panel"> "printer and fax" in the lower left corner, find the printer icon, right-click the printer, select "properties", and open the Properties dialog box, select the "Port" tab to check the port selected by the driver. (As shown in)
(2) Right-click "my computer", open "manage", click "Device Manager", and find DOT4 USB Printer Support. (As shown in)
(3) Right-click DOT4 USB Printer Support, select "reinstall driver", click "Install from list or specified location (advanced)", and click "Next ". (As shown in)
(4) Click "do not search" and select the driver to be installed (D ). Click "Next ". (As shown in)
(5) cancel the display of compatible hardware check boxes
Select USB Printing Support and click Next. Click "Install Program" and click "finish. Open the Universal Serial Bus Controller. the USB Printing Support port appears under this item. (As shown in)
In the step 1, open the printer Properties dialog box. Select "Port" and re-select the USB port. (As shown in)