How to count the scrap ink cartridge in the Epson printer?

Epson Inkjet Printer used for a long time, the inside of the ink cartridges count to a specified number, the machine will stop printing, a boot, on the appearance of all warning lights flashing, print program prompts machine failure, contact maintenance staff. What to do, that only clear 0 is normal.

1, first, to ensure that the USB cable correctly connected to the printer, the driver is normal, these two are prerequisites, otherwise will not succeed. We open the 0 software

2, double-click Adjprog.exe into the pop-up menu below

3, press ENTER, enter the upper right corner after entering the choice:

4, select the corresponding port on the back of the printer, such as USBX (R270). Press ok

5, then click on "Specific maintenance mode", into the next step

6, after entering the waste ink pad counters, double-click into

7, in the test "read the value of the Waste box pad counter"---detection

8, then the "Main ink Pad counter", "drum pad counter" are on the hook

9, the next point to detect the initialization of the following

10, you will be prompted to close the printer, when you turn off the printer, shut down the software, then open the printer, try printing. You can print the words to prove that your printing is normal.

Precautions:

1, in the operation process, can not power off, or can not succeed.

2. If you fail for the first time, you can do it again.