How to create a recovery disc

Source: Internet
Author: User

One-click Recovery 7.0 Create Recovery disc method

1, click on the Windows 7 system desktop OKR7.0 "one-click Recovery" icon

2, in the pop-up window click "Create Recovery Disc", as shown in the following figure:

3, in the following image page, select the "Factory default recovery CD" can be. The rest of the steps, follow the instructions.

CD Features:

Through the above operation to create a system recovery CD-ROM, the client computer can restore the entire hard disk file (System) to the factory pre-installed state: Operating system, driver, random software, drive backup folder, hard disk partition and a key to restore hidden partitions and other information.

Disc Recovery considerations:

When the system is restored, it is necessary to back up all the useful data in the client's hard disk (including the encrypted data in the partial fingerprint identification model), and it is strongly recommended to decrypt the encrypted data before the backup operation.

Disclaimer Statement:

Create a good system image file only for the corresponding model, and pre-installed associated with the corresponding Windows 7 OEM system version of the use of machines, please do not apply to other occasions, otherwise you will bear the possible copyright-related legal risks!

The XP model to create the recovery disc method

Note: your Microsoft (r) Windows (r) license only allows you to create a set of Product Recovery discs, so it is important that you store them in a safe place after you make the disc.

When you use the Product Recovery CD, all data and partitions on the hard disk are deleted. Please confirm that all partitions on your hard drive need to be saved before you prepare for recovery;

The end result will have only one C: partition that contains the original factory content.

To create a set of Product Recovery discs, go to start--> All Programs--> thinkvantage--> create Recovery Media.

1. Under the Restore CD menu, select immediately to create a set of product recovery discs (including the boot CD and system CD two), click OK.

Note: Save media is media that can start a pre-boot environment, does not include the operating system part, this disc does not support DVD disc, please note the notes on the menu.

2, the appearance of the extraction file waiting menu.

3, later will appear select a recordable drive menu, if the current computer with more than one optical drive device, please select the equipment to be used as the production medium; Click OK.

4, then there will be inserted into the empty disk or erasable disc prompts, please insert a blank CD disc, click OK.

5, then will appear in the pre-production of the original plate ... Prompt, a prompt to burn will appear, and the current progress is displayed.

6, when the boot disc is finished, the following menu will appear, please take out the disc, and follow the prompts to paste the label or do a good job marking.

7, and then insert a blank CD disc or a blank DVD disc (if the current computer is configured with a DVD-RW drive)

Note: The next step is to burn the operating system's recovery disc process, depending on the capacity of the currently preloaded operating system, if a CD platter is used, about 6-7 platters are required, and if a DVD platter is used, about 1-2 platters are required.

(for example, to insert a DVD disc for a minute record, describe the burn process)

8, finally prompted the file to burn successfully. Please remove the platters and follow the prompts to label them or mark them properly.

9, click OK, appear as shown in the following figure, confirm the restoration of CD-ROM production has been completed.

The Windows 7 model is preloaded with the build recovery disc method

1, Windows 7 burn the recovery disc from the Control Panel to enter, select "lenovo-Factory recovery Disk";

2, Pop-up prompts, you want to make the recovery media can only be applied to the system, check the selection after the determination. Note: The first disc still does not support Dvd-ram;

3, and the previous interface slightly different, optional guide media and data media, are identified after the election;

4, prompts to extract documents, about five or six minutes;

5, choose to burn the optical drive, determine;

6, continue to extract documents;

7, Pop-up prompts, OK;

8, the prompt inserts the blank disc, the optical drive simultaneously ejects. After inserting the first CD, determine;

9, there will be progress bar, patiently waiting;

10, prompts the media to make the successful, determine, CD-ROM eject;

11, the prompt production restores the data medium, the point is;

12, the reminder inserts the DVD blank disc, determines;

13, wait patiently;

14, the hint inserts the DVD blank Disc 2, determines;

15, continue to wait patiently;

16, the reminder to burn successfully, to this point, restore disc burning successfully.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.