Let's give you a detailed analysis of the effects of the design wear stamp.
Tutorial sharing:
1. Open or create a file in Illustrator that you want to use as an rubber seal.
2. Run the Select All command. Select filter -- distort -- Roughen (the parameters are set to 1%, relative, 20 segments per inch, and Corner respectively ).
3. Generate a small rectangle and copy it to make 9 copies of the rectangle.
Select filter -- distort -- Roughen (the parameter settings are 1%, 20 segments per inch, and Corner respectively). If you think it is not attached to the following figure, you can increase the value as needed.
4. Select object -- transform each (horizontal = 50%, vertical = 50%, move horizontal = 20, move vertical = 20, rotate = 180), and select Random, click COPY. (Must be copied). Select all content and use transform again until there are several small "dust" and then use the GROUP command for them, as shown in the figure below.
5. Move the "dust" to the front of the work. If they cannot completely cover the work, copy the work until it is completely covered.
Rotate a copy of "dust" on the entire file. Match the color of some "dust" with the work (that is, fill the color of the stamp), and then change the remaining color to match with the background (if there is no object below, it should be white ). (The easy way is to place everything on their own colored layers, lock other layers, and remove the combination of dust.
From this example, we can find that the ROUGH filter is useful when randomization is used. There is also transform each, which provides us with integrated individual control.
All right, the above information is the detailed design wear graph effect creation tutorial for the users of this software of Illustrator, you can see that the user here, Xiaobian believes that everyone is very clear about the drawing method, then everyone will go to follow the tutorial shared above to create a favorite wear stamp.
