How to enlarge microphone sound

Microphone Voice too small how to do, how to enlarge the microphone sound, this tutorial will introduce you to enlarge the microphone sound method.

　　Step ①: first of all, to ensure that your microphone (headset) access to the computer input and output 100% correct, do not pick up the wrong, connect the wrong, do nothing. (The green end of the computer is the sound output that plays music, the pink side of the computer is the sound input that is used for recording)

　　Step ②: Right-click on the desktop "My Computer"--Properties--hardware--Settings Manager--Audio video and game controller--under this item if there is no AC97 or high definition or other long string of English, or there is a yellow question mark.

　　situation Two: Click on the bottom left corner of the desktop-control panel-sound and audio Devices-all of the settings are gray, that is, it is not available. If either of these two situations exist, you go directly to the Internet to download the "Drive Wizard" software, install it, double hit drive-Drive update-check "sound video and game controller"-Start the update-restart the computer after the update is complete. If both of these cases are not present, please see the following steps directly.

　　Step ③: If there is no small horn in the lower right corner of the desktop, start-control panel-sound and Audio devices-check "put the volume icon into the taskbar"-OK.

　　Step ④: Click on the lower right corner of the desktop small horn--options--attributes--All options tick tick click "OK", you will see a long window, and a lot of it has not been shown, pulling the scroll bar below you will see that all the "mute" is not selected, and pull all the volume strips into the middle. Options--Properties--recordings--all options are ticked, click OK, and pull all the volume bars into the middle. Computer knowledge

　　Step ⑤: Make sure that your microphone (headset) is correctly inserted in front of the mainframe box, if you have a speaker in the back of the main box, please turn off the speaker, but the speaker line can not be unplugged. Click "Start" in the lower left corner of the desktop--control panel--see "Realtek High Definition Audio Configuration" (if you do not ask you to see the 6th step directly)--"The bottom left X tool in the mixer bar is checked on" Start multiple recordings "--the X tool in the upper right of the audio I/O bar is selected. Prevent front panel Jack detection "-at this point the mixer" at the bottom right of a mic in front panel (Pink), to ensure that it is currently selected--in the top left X tool in the mixer do not check "enable multiple source playback", and then click OK.

Click on the lower left corner of the desktop--control panel--sound and audio Devices--"audio" bar-"recording" Selected Mic in front panel (Pink), ensure "Use default device only" is not ticked, click "Apply"--"voice" bar-"recording" Select Mic in Front panel (Pink), click "OK". Click on the lower right corner of the desktop small horn--options--Properties--In the "mixer" in the MIC in front panel (Pink)--All the options below, click "OK" and pull all the volume bar to the middle. If you can finish this step, it should be OK.

　　Step ⑥: Right-click on the desktop "My Computer"--Properties--hardware--Settings Manager--Audio video and game controller--under this item if there is a Realtek AC97 Audio (if you do not have you do not have to do step ⑥): Click on the lower left corner of the desktop--control panel--sound and audio Devices--"audio" bar-"sound playback" and "Recording" Selected Realtek AC97 Audio, to ensure "use only the default device" is not ticked, click "Application"-" "Voice" bar-"sound playback" and "Recording" Selected Realtek AC97 audio click "OK".

Click on the lower right corner of the desktop-----------------------------------------------select Realtek AC97 Audio in the mixer, click "Play"-- This will automatically exit, you will see a long window, there are many still not shown, pull the following scroll bar you will see, to ensure that all the "mute" is not selected, and all the volume bar to the middle. Options--Properties--Select Realtek AC97 Audio in the mixer, click "Record"--check all options below, click "OK" and pull all the volume bars into the middle. Go and try it!

Related tutorials:

What if the microphone sounds small?

What about the computer microphone echo?

How to set up a microphone in Win7 system