How to access the Router management interface

If you are using a router to automatically dial the Internet, it is necessary to know some ways to set up a broadband router.

Completing the router installation

The first is to connect ADSL MODEM, router, computer.

Router's management address factory general default: IP Address: 192. 168.1. 1, subnet mask: 255. 255.255. 0 (tl-r400 and tl-r400+ two admin address defaults to: 192. 168.123. 254, Subnet mask: 255. 255.255. 0).

Use network cable to connect the router LAN port and computer network card, because the Ethernet port on the router has the polarity of automatic flip function, so no matter your network cable using straight line or crossed lines can be, you need to ensure that the production of the crystal head of a reliable and stable, crystal Head copper film does not rust.

For router installation, refer to the router installation and setup method.

Local Connection Network settings

On the desktop, right-click on "My Network Neighborhood", select "Properties", double-click Open "Local Connection" in the pop-up window, click "Properties" in the pop-up window, then look for Internet Protocol (TCP/IP), and double-click the Internet Protocol (TCP/IP) Properties window; Reply from 192. 168.1. 1:bytes=32 time<10ms ttl=128 Reply from 192. 168.1. 1:bytes=32 time<10ms ttl=128 Reply from 192. 168.1. 1:bytes=32 time<10ms ttl=128 If the above information does not appear after the carriage return, but prompts you to enter a command that is not an internal command or an external command, or a running program or batch program, the command input is incorrect, please check that input such as space is ignored.

Landing Router Management interface

A message appears indicating that the computer can communicate with the router, open IE browser, enter 192 in the Address bar. 168.1. 1 and enter, normally a dialog box that requires a username and password will appear.

Of course, there are exceptions: if you open the IE browser address bar input address Enter, pop-up "Work Offline" dialog box, the point is "connect" after the Small Dial window, click the IE browser menu bar "Tools"-"Internet Options", in the pop-up dialog box click "Connect", It should be said that there is no barrier to access to the router management interface.