How to change a notebook with Windows 7 to a wireless router

Enable the hidden function of windows 7: Virtual WiFi and SoftAP (Virtual Wireless AP), you can turn the computer into a wireless router,
Wireless Terminal devices share the Internet with laptops to reduce network fees and the cost of purchasing wireless routers. If you use a Windows 7 laptop or a desktop with a wireless network card as the host, you must connect the host to the optical fiber and broadband network. The host settings are as follows: 1. Run Command Prompt as Administrator: shortcut key win + R → Enter cmd → press ENTER www.2cto.com 2. Enable and set virtual WiFi NIC: run command: netsh wlan set hostednetwork mode = allow ssid = Diligent key = password this command has three parameters: mode: whether to enable the virtual WiFi Nic, and change to disallow is disabled. Ssid: wireless network name. It is recommended to use English (using Diligent as an example) key: wireless network password, more than eight characters (using password as an example ). The preceding three parameters can be used independently. For example, you can disable a virtual Wi-Fi network card by using mode = disallow only. After enabling, a wireless connection 2 with the "Microsoft Virtual WiFi Miniport Adapter" is displayed in the network connection,
For convenience, rename it "virtual WiFi ". If no, you only need to update the wireless NIC Driver. 3. Set Internet Connection Sharing: In the "Network Connection" window, right-click a network connection that has been connected to the Internet, for example, "Local Connection", and select "properties"> "share ", check "allow others... connection (N)" and select "virtual WiFi". Note: If you click share, an error message is displayed, you need to enable the "Windows Firewall" service. "Computer"-Right-click "manage"-select "services and applications"-select "services"-find and start the "Windows Firewall" service in the list, that is, OK! After confirmation, "shared" will appear next to the shared Nic icon, indicating that "Broadband connection" has been shared to "virtual WiFi 4. enable wireless network: run "netsh wlan start hostednetwork" in the command prompt www.2cto.com. (Change "start" to "stop" to disable the wireless network. To enable the wireless network after it is started, run the command again, the Red Cross of virtual WiFi disappears, the Wi-Fi base station has been set up, and the host has been set up. Laptops, mobile phones with WiFi modules, and other sub-computers can find the wireless network Diligent. Enter the password and password to share the internet! Appendix: Command for displaying Wireless Network Information: netsh wlan show hostednetwork the WLAN emitted by the virtual Wireless AP is 802.11g standard, and the bandwidth is 54 Mbps by Mu Yushan