How to connect your computer to the Internet through a mobile phone

Source: Internet
Author: User

 

How to connect your computer to the Internet through a mobile phone

I. Mobile phone
1. The mobile phone must have a data line interface or an infrared interface to support the GPRS internet access function.
2. Machine Settings (taking nakia7610 as an example, let's take a look at it) 6f] is
A) choose "menu"> "Settings"> "Data Connection"> "GPRS"> "GPRS connection", and select "when necessary ", if you want to prove that your cell phone battery is good enough, you can also choose "always online", so that you can charge again in half an hour!

B) "menu"-> "Settings"-> "data connectivity"-> "GPRS"-> "GPRS modem settings"-> "Modify Access Point"-> "GPRS access point ", fill in "cmwap". (If this step is not set or cannot be found, you can skip this step. Of course, it is better!

Ii. Data line and infrared
There are two kinds of data cable DKU-5 and DKU-2, refers to the Nokia! Among them, the most dku-5 with the support of mobile phone is also the most!
First install the DKU-5 driver, the original driver contains two drivers, one is to the comport driver, there is a data line driver, both must be installed! Restart after the driver is installed! Finally, install the PC kit. The higher the version, the better! (More than 6.4 of which contain dku-2 data line drive), after installing the PC kit, and then restart it! Install the driver.
Infrared Rays are relatively simple, just install the driver. After the driver is installed, the system tray contains an infrared icon. You can see it at a glance!

Iii. Computer
1. If you have a data cable installed, open the "control panel", double-click "telephone and modem options", and click the "modem" tab in the pop-up box, click "add" to install the mobile phone MODEM. In the pop-up box, click "do not detect my modem". I will select from the list." In the previous check box, click Next, select Nokia in the manufacturer box, and select your mobile phone model (Cable refers to the cat of the data cable, IrDA refers to the cat of the infrared, do not select the wrong port.) Click Next and on the "port on which to install? ", Select "the port where the data line is located" (you can see the port number in the Device Manager), click next, and then press "continue" in the displayed verification box ", finally, press "finish ". Click "OK" to exit!
2. If it is infrared, open the infrared interface of the mobile phone and align it with the infrared adapter. The computer will automatically install the driver of the mobile phone cat. The standard infrared modem is installed in the XP system, there is also an infrared cat of your mobile phone model under 2000, that is, what is 3220 IrDA and so on, two cats can be used, it is best to choose your mobile phone cat driver during dial-up connection, do not select a standard infrared modem.
3. Open "Control Panel", double-click "Nokia modem settings", fill in "cmwap" in the "GPRS Access Point" box, and click "OK" to exit! If your card supports cmnet access, no protection is provided if you have enough money. If this parameter is not set, cmwap must be set for the GPRS Access Point of the mobile phone. If neither of them is set, the mobile phone will display "No GPRS request applied" When dialing. If both are set, when dialing, it depends on the Access Point entered on the computer.
4. Change the mobile phone and cat. Click Control Panel-telephone and modem-select your mobile phone cat-properties-maximum port speed: 230400 (if there is a problem with the dial-up prompt that the cat cannot be found, change to 115200 ). Gy _

4. Establish a dial-up connection
1. Choose "create a connection"> "Internet"> "Connect"> "create a connection manually"> "connect to a modem over a telephone line"> "select your mobile phone cat-dialing number: * 99 #, * 99 *** 2 #, or * 99 *** 3 #. One of them is (may vary across regions) and the dialing rules are not used! -Do not fill in the username or password.-create a name for this dial-up connection, such as a GPRS connection.-OK!

2. Choose System Panel-Internet-connection-select the connection you just created-settings-HOOK: Use the proxy server, enter 10.0.0.172, and Port: 80-click the dialing setting property-select the cat you used when dialing, the default has been selected-configuration-maximum speed select 23400 (data line), 921600 (infrared ). If you cannot find the cat or the unstable old line is lost when using the data line dialing prompt, change 23400 to 115200; do not change the infrared line! Click OK to exit! In the "network" option, select only the Internet Protocol (TCP/IP), and do not select any other option, which can speed up the connection. Finally, confirm to exit.

3. Create a panel-Internet-advanced-hook and use http1.1 through a proxy connection-then go to the multimedia column to remove images, animations, and videos from the hook, (This will accelerate the speed of browsing the Web page, which is more useful than the mobile accelerator). Of course, you can choose all the pictures you want, but the speed of opening the web page will be very slow! Let's just wait while drinking tea,
In fact, setting up a dial-up connection is not so troublesome. Mobile has a software called: GPRS internet access through train. using it to establish a dial-up connection is very fast, and it has been set up in it, only one or two steps are required! Using this software to dial and disconnect the dial connection is very fast!

5. Most problems and answers:
1. When dialing, the system prompts that the cat cannot be found and the dialing fails.
A:
A) The data line, the infrared driver should be installed, and then the data line speed should be changed to 115200, the infrared speed should be changed to 57600, and then the modem will be diagnosed and queried in the modem, check whether you can find the mobile phone cat. If you can find it, you can dial. If you cannot find it, check whether the data line is connected. You can unplug it, restart your computer and mobile phone, and then plug in the data line.
B) The data line interface in the mobile phone should be clean, and the data line quality should not be too bad. You may be able to restart the computer and the mobile phone to shut down and then start the system. In addition, the data line must be plugged in until "Data attachments are connected" appears on the mobile phone! U
C) The data line with poor quality cannot detect the mobile phone cat. If the data line is inserted on the mobile phone, there is no response. The "data attachment connected" must appear! Otherwise, this data line cannot be used for dial-up Internet access, and can only be used to transmit image ringtones. '=
D) if the data line is inserted on the mobile phone, the following error occurs: "The attachment is not supported." No dialing is allowed. Check whether the mobile phone interface is gray or the data line is faulty.

2. The number is successful, but the webpage cannot be opened.
A:
A) the proxy server address of the dial-up connection must be filled and checked. Are you sure you want to exit! (Many of my friends forgot to hook up and quit after filling out the address.) Also, the control panel-Internet-advanced-hook uses http1.1 through proxy connection, so be sure to hook up and exit. W)
B) if not, try another browser, for example, ttbrowser. But the proxy server needs to be added again. A webpage can open several more windows, that is to say, the webpage of each window is the same address. My browser occasionally fails to open the webpage, so I can try again. If not, close the browser and try again. Just try again several times.
C) Check whether your system has any problems. Try another system (it is best to have a lot of problems in 2000 SP3 or XP, 98 and me ).

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.