How to install centos on the vmvare Virtual Machine in linux, vmvarecentos
How to install centos on a vmvare Virtual Machine in linux
1. download and install the VMvare Virtual Machine on your computer
2. Click "create new virtual machine"
3. Select a typical installation and a linux system. Do not mount and install the CD image first. Use Other Default options. After the installation is complete, set the hardware and mount and install the CD image, set the screen resolution to 800*600 (greater than this value, otherwise the installation will fail) and the network will be set to bridging;
4. Enable the virtual machine, enter the BIOS, and set it to the Boot Mode of the disc. There is a simple way to enter the BIOS, so that you can directly enter the BIOS at startup without pressing F2 all the time;
5. Click Start VM. The VM starts from the CD image. Select the first option to install the VM, and then enter the blue-screen red-letter interface. you can skip the option directly, not important. Then, the graphic operation interface is displayed;
6. Go to the graphic operation interface and select Simplified Chinese language. The following options are available by default. When selecting a type for installation, select "create custom layout" for partitioning;
7. Partition: Just perform the partition according to the partition layout shown in the figure. First, allocate the 200 M/boot partition. When the 2G swap partition is allocated, directly mount the root directory /:
8. Select "minimal installation" and "minimal" for installation. Then, install the tool automatically.