How to install the router

How does the router install? Broadband Router Setup diagram Seven step, broadband router Setup is a very common problem, but how do we set the broadband router more precise settings, to our use come convenient?

Wiring (This step is very important, for a beginner) through a network cable, one end access to the broadband router LAN port of any interface, the other end of your computer's network card, the router connected to power.

Network connection settings, see Figure 1, double-click the Protocol. A dialog box will be clicked to fill in the IP address 198.162.1.X (X is 2-254 any value). As shown in Figure 2

Click IE Browser. The address bar input http://192.168.1.1, the following window will appear the user name generally admin, the default password is also admin. You can check my password.

Once determined, the left column of the following window (the WAN is the main setting) has nine options. (System settings, WAN settings, LAN settings, routing, NAT, firewall Dynamic DNS, other options, parental management) Click Wan Settings (take PPPoE as an example) and fill in your own account number and password. Do not know can be obtained from the installation department (usually on the back of the installation disk for installation) and MAC address cloning

(This is mainly in order to deal with the ISP will account and network card MAC address binding, clone Mac is the real MAC address of the Internet computer), and DNS primary and secondary. (DNS added here can save the trouble of adding DNS separately on each computer), MAC address and DNS primary and secondary items can be queried directly in your computer. After running cmd, you can get these parameters by executing ipconfig/all.

During router setup, be aware of LAN settings, which are primarily for DHCP settings. If the DHCP service is opened at this time, then the IP address of the network computer is automatically allocated by the broadband router, the default IP range is 192.1681.2-192.168.1.102, at this time must be the computer's IP set to automatically obtain (Figure 7);

If disabling the DHCP service requires each computer to manually add an IP address, the IP can be any one of the 192.168.1.2-192.168.1.254. After each item, remember to click on the application. Now insert the line into the router's WAN port when you install the broadband. Reboot the router. If the connection is still not on, it is recommended to restart the computer. After reboot, the router is finished, you can use it at ease.