How to install Win7 prompts windows not to install to disk

Windows Home (www.windowszj.com): In the process of installing Win7 system, because each computer's status is different, such as hardware configuration reasons, or hard disk format, hard disk status and other issues, will make each computer in the installation process will be somewhat different, Serious problems can occur, such as: "Windows cannot install to this disk " error message. And this error hint is divided into many kinds, below, the small series on the Windows can not be installed to the disk of the different tips to do a summary and the corresponding solution.

　　The first of these phenomena:

When the Win7 system is installed, the disk partition interface cannot continue, and "Windows cannot install to this disk." The selected disk has an MBR partition table. On an EFI system, Windows can only be installed to GPT disks.

Cause: This problem occurs because the user incorrectly chooses the boot startup item when booting the system with a CD-ROM. (although the CD-ROM booting system installation is rare, but there will be some people will use, so the small part of the problem is also included here to explain.) )

　　Workaround:

1. Just install the system.

You can use the following methods: Verify that no important data on the disk, restart the computer, press F12 (or other startup hotkey) into the BIOS setup interface, find and select Legacy only the normal installation can be resolved.

2. If you are using a GPT partition table to install the system.

The following conditions are required:

A. Motherboard for Intel 6 series and above;

B. Operating system with 64-bit vista and above (PS: The current Lenovo commercial Desktop random OEM system is not supported in this GPT mode!) so use Lenovo Commercial Desktop random OEM system do not consider pull!)

If you can confirm that your computer is satisfied with the above conditions, and the hard disk has no important data, you can boot the disk partition interface from the CD, and delete all partitions (including hidden partitions), on this basis, the normal partition, after the format of the Win7 system installation, can be implemented in GPT disk format to complete the system installation.

　The second phenomenon :

When installing Win7, a "Windows cannot install to this disk, selected disks in GPT partition format" prompt message.

　　Workaround:

When you are prompted with the above behavior, press and hold the SHIFT+F10 shortcut key to open a command prompt (that is, the Cmd.exe program), and then enter:

1. Enter diskpart and press ENTER;

2. Enter the list disk and press ENTER;

3. Enter select disk C; ("C" here is the one that will install the Win7 system, if you want to install the Win7 system on the D drive, enter select Disk D, which is how to write the other disks.) )

4. Enter clean, and enter to clear the current disk partition;

5. Enter convert MBR, and the carriage return will represent that the MBR partition has been converted.

The computer refreshes several times, then follow the normal Win7 installation steps to complete the installation of the Win7 system.

　　The third phenomenon:

When you install the Win7 system, you are prompted that Windows cannot install to this disk. Windows requires a driver for the device [Intel (R) ICH7M/MDH SATA AHCI Controller]. Click Load drivers, and then load the required device drivers.

　　Workaround:

1. First confirm that the image of the installation system is the original disc image.

2. Before the system installation, the disk partition tool, for example: PQMAGIC,PM, and so on, to format the disk, (PS: Note To set up the primary and active partitions, and the format of the disk partition must be NTFS, after the completion of the format will also need to re-establish the partition table.

3. In fact, the general brand machine is a hard disk protection effect, so need to look at the instructions or consulting the brand's after-sales service personnel, see if there is a hard disk protection, and confirm the removal of hard disk protection measures. For example, some models can remove the hard drive protection by pressing the home button at startup.

4. This behavior can also occur when there is a problem with the hard drive mode. So as soon as the BIOS is entered, the hard drive mode is changed from the original AHCI (similar to Serial ATA or configure SATA as in the SATA mode option) to compatibility, and the system can be installed after the BIOS restarts the computer. It is also possible to change AHCI to an IDE if there is no compatibility or cannot be changed. PS: When the system installation is complete, do not forget to change the hard drive mode back to AHCI, restore the BIOS factory settings are also possible.

5. If not, you can try the solution to the second phenomenon.

　　The fourth kind of phenomenon:

When you install Win7, the prompt "Windows cannot install to this disk" appears. The hardware for this computer may not support booting to this disk. Make sure that the disk controller is enabled in the computer's BIOS menu. ”

　　Workaround:

1. If you have done BIOS setup before, the simplest way is to go to the BIOS Setup page and restore the factory settings!

2. This is the hard drive mode problem caused by this message box, you put the BIOS settings in the hard drive mode from AHCI to compatibility can be.

The specific method is described in the third case of the 4th method.

　　The fifth kind of phenomenon:

The prompt "Windows cannot install to this disk" appears. Windows requires a device [RAID controller] driver. Click Load drivers, and then load the required device drivers. ”

　　Workaround:

Run the extracted image file in the sources directory in the Setup.exe, not the extracted image file under the root directory of the setup.

The above is a short summary of a few of the "Windows cannot install to this disk" problem solution. Hope to bring you help. If there are better suggestions or imperfections, please advise. The home of Windows offers you win7 system downloads ,win8 system downloads ,win8 Pure Edition and system tutorials.

Now the system re-installation of a variety of methods, and more and more tend to "fool", facing so many heavy-load system software, how can we tell which system reload software is the best. For everyone to recommend a very good reload system software - system home One-button reload master. We can use it to reload WIN8 system, Win7 system,XP system with one click.

: http://chongzhuang.windowszj.com/1.html

• Absrtact: In the process of installing Win7 system, due to the different status of each computer, such as hardware configuration, or hard disk format, hard disk status, etc., will make each ...

How do I install Win7 prompts windows not to install to disk