How to install Windows 7 hard drive

Source: Internet
Author: User

Not all computers are equipped with DVD Rom, which makes it difficult to install Windows 7 on the computer. Windows 7 cannot be installed on the optical drive, or you can use a USB flash drive to install Windows 7. However, USB flash drives are not supported by all computers. You can only use the hard disk installation method. Before that, XP and Vista can directly use the virtual optical drive to mount the system image for installation. However, win7 does not support this method. Hard Disk installation is a little troublesome. Today, fworld helped a friend install win7 in his notebook (with a drive problem). After trying, it was not too troublesome to install the hard disk. If you do not have a DVD drive on your computer, try win7 again!

1. Install Windows 7 (Advanced edition) on Windows 7:

1. Download the Windows 7 7600 ISO image (RC or RTM), load the image with a virtual optical drive, and select all folders and files to copy to a non-C disk (such as D: \ 7600)
2. Press F8 to fix the system and select the last command to fix the system. Enter "D: \ 7600 \ sources \ setup.exe" in the Command box (without quotation marks)
3. Go to the installation page and select Custom for installation.
4. Select the installation language and format the C drive.
5. OK. After installation, it is a pure system (non-Dual System ).

2. If you have a vista installation disk, the method is also very simple:

1. Download the Windows 7 7600 ISO image, use the virtual optical drive to load the image, select all folders and files, and copy them to a non-C drive (such as D: \ 7600)
2. Enable the optical drive in the BIOS to go To the Vista installation page.
3. Select repair computer in the lower left corner (automatically search for the system, and prompt to load or close the driver. Select disable to enter the Repair Option)
4. Select the last command for restoration. In the command box, enter "D: \ 7600 \ sources \ setup.exe" (without quotation marks) to start installation.
5. Select the installation language and format the C drive (even if the C drive has no system)

Iii. Windows 7 installation in Windows XP:

1. Download the Windows 7 7600 ISO image, use the virtual optical drive to load the image, select all folders and files, and copy them to a non-C drive (such as D: \ 7600)
2. Put the bootmgr and boot directories under the D: \ 7600 directory (in fact, as long as the boot. SDI and BCD files) are copied to the C root directory, and a Sources folder is created under the C root directory. (Administrator permissions are not required in xp)
3. Copy boot. Win under D: \ 7600 \ sources to the Sources folder just created on drive C.
4. Run cmd as an administrator and enter c: \ Boot \ bootsect.exe/nt60 C: the prompt successful is displayed. (There are two spaces in the red part, that is, success !)
5. Close the CMD window and restart the computer. The installation interface is automatically displayed. Select the installation language and the appropriate time and currency display type and keyboard and input mode.
6. The "Start installation interface" appears. (Note that you do not need to click "Install now".) Click "repair mycomputer" in the lower left corner to go to "System Recovery selection ", select the last command prompt (commandprompt) to enter the DOS window.
7. Enter "D: \ 7600 \ sources \ setup.exe" (without quotation marks) to start installation.
8. Select the installation language and format the C drive.

4. Install Windows 7 in the Vista system (it has been proved that XP is more convenient to use this method ):

1. Download the Windows 7 7600 ISO image, use the virtual optical drive to load the image, select all folders and files, and copy them to a non-C drive (such as D: \ 7600)
2. Copy the boot, EFI, and sources folders and bootmgr from the D: \ 7600 folder to the C root directory.
3. Copy bootsect.exe under D: \ 7600 \ bootto the C root directory.
2nd requires administrator permissions
4. Run cmd as an administrator, enter c: \ bootsect.exe/nt60 C: And press enter (it is best to copy it. The red part has two spaces)
5. restart the system to automatically go to the installation page, and click repair computer repair my computer in the lower left corner)
6. Select the last command prompt and enter the DOS window. Enter D: \ 7600 \ sources \ setup.exe to enter the installation interface.
7. Select the installation language and format the C drive.

5. Installation Method in the PE system:

1. Download the Windows 7 7600 ISO image, use the virtual optical drive to load the image, select all folders and files, and copy them to a non-C drive (such as D: \ 7600)
2. Format: Drive C, NTFS.
2. Put the bootmgr and boot directories under the D: \ 7600 directory (in fact, as long as the boot. SDI and BCD files) are copied to the C root directory, and a Sources folder is created under the C root directory.
3. Copy boot. Win under D: \ 7600 \ sources to the Sources folder just created on drive C.
4. Run CMD and enter c: \ Boot \ bootsect.exe/nt60 C: the successful prompt is displayed !)
5. Close the CMD window, restart the computer, automatically enter the installation interface, select the installation language, and select the appropriate time and currency display type and keyboard and input mode.
6. The "Start installation interface" appears. (Note that you do not need to click "Install now".) Click "repair mycomputer" in the lower left corner to go to "System Recovery selection ", select the last command prompt (commandprompt) to enter the DOS window.
7. Enter "D: \ 7600 \ sources \ setup.exe" (without quotation marks) to start installation.
8. Select the installation language and format the C drive.

From: http://bbs.tech.ccidnet.com/read.php? Tid = 898986

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.