How to make a U disk volume into cd-rom+ mobile disk mode

how to produce a U disk volume into cd-rom+ mobile disk mode:

　　1, Analysis U disk chip

Using tool Chipgenius,chipgenius is a USB device chip model detection tool, can automatically query U disk, Mp3/mp4, card reader, mobile hard disk and so on all the main control chip model, manufacturers, brands, and provide relevant information to download the address. Of course, can also query the USB device vid/pid information, device name, interface speed, serial number, device version, and so on. Analysis chip for group-linked UP8~UP10 (UP10 is PS2136) No amount of prenatal testing is UP10, the amount of postpartum into ps2136)

　　Chipgenius Green Version (Chip Wizard) 4.0b24 Green Edition

　　2. Download mass Production tools

Of course, to fit their own chip, through the query, download this chip mass Production tool group v1.89.00 for UP12, support UP10.

After downloading, we found 4 files inside. F1_90_V189.EXE,F2_V189.EXE,PARAMEDT-F1-V1.0.14.3.EXE,PARAMEDT-F2-V1.0.14.3.EXE,F1 is the tool that I will be able to use, F2 is the manufacturer DIY tool temporarily not.

Open F1_90_v189.exe, point to get information.

Open Paramedt-f1-v1.0.14.3.exe This program

Select the F1-1 tab.

Start filling out customer information. Load Default is generally checked, but the vid pid must be 0x???? The format, such as my u disk vid is 13FE to fill in 0x13fe, PID, fill in 0x1f00 (Note: x symbol in English letter x, no problem). Manufacturers, fill in your U disk manufacturers, I was copied from the Chipgenius, fill in the Apacer product on the USB FLASH DRIVE. Tick "Auto detect". Because you fill in the manual is not necessarily correct. In the following mode, choose 21 (meaning: a U disk is made into a CD-ROM and a removable disk).

* Note: In fact, in addition to the mode of the column is required, the other can not fill out.

Customer Information: recommended to fill in, in case you need this data can be read. Note that the PID and vid must follow the 0x???? format, otherwise discarded.

Revision: PMAP (if software identification, will automatically fill in)

Configuration: It is strongly recommended to check "Auto detect". You cannot guarantee that the capacity is correct by manual filling, because the capacity you see is not necessarily the real capacity.

Volume Label: Can fill in without filling. Tip: A hidden area (a private area) is an area that can be hidden, not a hidden area,

Serial number: Do not fill in. If you fill out the error, you may need to complete the format to use the U disk

Preformat: Don't choose. Unless you suspect that your USB drive has a bad zone, or that the last mass production failed. No tick will be formatted. Check for low-level formatting similar to hard disk. Check, in the subsequent operation will appear a manual plug u disk operation.

Hidden size: Hidden u disk part capacity. The hidden size is the number you fill out. Note that hiding is not a partition hidden, it is actually closed. This portion of capacity is not present unless the mass production operation is performed again.

　　Definition of pattern: focus

3 The U disk into a removable disc. If you want to restore the U disk into just buy back the state, use this mode (repair u disk commonly used)

4 the U disk into a private (can be hidden) mobile disks and a floppy diskette. You need to specify the floppy image file in the label "F1-2".

7 the U disk into a private mobile disk and a public removable disk. Private removable disks can perform cryptographic operations, and private disks are hidden after encryption.

8 The U disk into a removable disc, can be hidden, open.

14 The U disk into a CD or hard disk (note that the hard drive, not removable disk) and a removable disk

21 make a CD-ROM and a removable disk. You need to specify the disc image file in the label "F1-2".

　　Choose 21 Mode here.

The above mode does not assume that only the partition operation, all to brush the firmware. For example, CD-ROM, to be in the U disk firmware to write optical device information, so that the operating system will install CD-ROM drive.

　　Partition capacity:

In some modes the item will appear, and you can specify the partition capacity. It is recommended that you use the default "Max".

If you want to fill out the content, save it, specify a filename, must be in the current directory.

　　After filling in the f1-1, fill in the F1-2 with the CD ISO you need to introduce

As long as the standard bootable *.iso or *.bin format on the line, the volume of the U disk is also bootable, and the use of CDROM when the same, ISO for DVD or CD mirroring can be. Add: The best to put PE, because the ghost disk found can not automatically install

After you fill out the content, save (or Save As), specify a filename (such as 001.) INI). But it must be in the same folder as F1_90_v181.exe.

After you set up your disc image, save the settings. Close paramedt-f1-v1.0.10.2

　　Four, plug in the U disk, open F1_90_v181.exe file

Click to get information. See if you can get your USB disk information on the left. If you can't get it, it's your USB flash drive that can't do mass production, which is why you recommend a apacer smile. Then select the configuration file. This is the configuration file that you just wrote. Position in the beginning results get information the Drop-down menu under the three buttons, which contains the configuration file you just saved, is on lock.

　　Five, at this time everything has been set. The u disk is plugged in and click the Start button.

This time, in the 16 rectangular squares below, the first box will turn yellow, after a while, you are prompted to plug a U disk once, and then the time used is probably to the U disk to write your ISO time, time to several minutes, when the U disk lamp has been flashing, the length of time depending on the selected ISO file size and U disk speed. After the normal completion of the yellow will become green, in the "Test Report" column will show "bad: 0, good: 1", "good" description of mass production success. At this point can close f1_90_v181.exe, directly pull out a U disk, do not go to the tube u disk flashing lights, nothing. At this point, the mass production process is all over. When you insert the U disk again, a USB cdrom and a new U disk will be automatically identified at this time.