How to record a computer sound using Cooledit

Preparation of computer audio settings

First, double-click the "Volume" icon on the right-hand side of the desktop, which is the little horn on the left of the picture above.

Figure 1

Step two, double-click after the "Volume Control" menu, click "Options" to choose "Properties."

Figure 2

Step three, click "Recording", then tick only before "Stereo Mix", then "OK".

Figure 3

Step four, "OK" will pop up the menu shown above, click on the "select" Before the tick, and then the volume at random to compare the position of the below, the recording time to do the specific debugging.

Figure 4

The above is for the computer itself some input settings, then it is time to open the cool edit pro use software.

　　Ii. complete the internal record with Cooledit

Step one, click the arrow in the above figure "R", the meaning is to define track 1 as the recording track.

Figure 5

Step two, the lower left corner of the interface for playback system operation of the keyboard, its principle, icon and the use of the player and we usually use the keyboard is no different, I believe we can be very natural use. Click on the recording key (the arrow) to start recording.

Figure 6

Step three, click Start Recording First, then play the music that needs to be recorded, the track will begin to ripple, the size of the ripple of music recorded on the sound size, recording is not affected by any external influence, but also with the volume size of the player independent, can affect it, only the "volume" adjustment in Figure 4. Remind you to pay special attention to: in the recording process to avoid some of the noise inside the system, such as the sound of the system error, cleaning the Recycle Bin and the Sound of the window zoom and so on (especially QQ and MSN Chat system such as the tone, preferably temporarily closed), these sounds will be recorded.

Figure 7

Step four, after the song is played, you can stop recording. Double-click the Red Track section in Figure 7 to go to the single track edit mode in the above figure, press and hold the left button to select the first blank ripple (that is, when you start recording but haven't started playing music this time blank), right click on "Cut". The end portion is likewise processed if there are extra blanks.

Figure 8

Step five, the last is to save (click "File" select "Save As"), personally think MP3 format is good, the system defaults to the specific standard is 128kbps,4410hz, of course, can also be based on individual needs to set higher accuracy.

Figure 9