How to remote switch computer of the Phantom of the Family router

Small weave today brings "the Charm Family Router Speed Edition remote switch computer tutorial" ~

1. To the computer BIOS to make the necessary settings (need network card, motherboard support remote wake-up);

2. The computer must be connected to the Phantom router via a network cable (not wireless).

Meet the above two conditions can be looked down!

Here are a few steps to implement a remote computer wakeup and shutdown:

remote computer wake-up

First, set up the computer BIOS

Take the Dell PRECISION T1700 (Windows 10 system) branded computer for example.

1. Enter the BIOS

Computer startup Press F2 can enter the BIOS setup interface, other brands ask Niang.

2. Set wake on LAN (Network wakeup) feature in BIOS

Check the LAN only in the Power Management->wake on LAN, check disabled in power Management->deep sleep control, and then save and exit.

Second, turn on the network wake-up function of the computer

On the computer desktop, right-click the computer-> Properties-> Device Manager-> network adapter, right-click the corresponding network card-> properties-> power management, and check "allow this device to wake the computer."

Third, remote wake-up computer

Enter the Phantom router app, select and install the "remote switch Computer" in the list of plugins, switch to the "Configure" interface after the installation completes, and select the device (computer name, for example, MZ-SZ-02-PC) to wake up in the device list and switch to the "boot device" Interface will automatically populate the device's MAC address, click "Boot Device" can wake up the computer.

remote computer shutdown

First, install Bitvise SSH Server

can be downloaded and installed via the attachment (as prompted to select a personal version to install it).

installed, in the open bitvise SSH Server Control Panel, click Open Easy Settgings, in the Server settings option, IP versions for listening port select IPv4 an D ipv6,listening Port fills in 22,open Windows Firewall Select Open Prot (s) to any computer, other defaults; then switch to Windows accounts option, add A local account, enter your computer username in Windows account name (the computer must have a password set because it needs to be validated for remote control), and other defaults and save.

Finally, click Start Server in the Bitvise SSH server Control Panel.

Second, remote shutdown computer

Enter the Phantom router app and select the device to shut down in the settings list in the configuration interface. Switching to the "Shut down" interface automatically populates the device's IP address, simply by typing the username and password in the username and password, and clicking "Close the device" to shut down the computer.

Note: The remote computer wakeup and shutdown all need to bind the router in the Phantom router app, the current bound routing operation only supports andoid client bindings, and the iOS client is still developing and perfecting.