How to restore the original computer system?

If there is no Restore Wizard and ghost This software is no way.

XP Belt's System Restore function is rotten.

Ghost is run under DOS, so a good system requires 98 and XP two discs to fix.

Specific operations

How to install XP system

 first step, set the lighting:

 so-called light, meaning that the computer at the start of the first read the optical drive, so that if the CD-ROM optical drive has a CD-ROM can be driven before the hard drive to read out (for example, when installing the system from the CD).

 Setting Method:

1. Start the computer and hold down the DEL key until the BIOS Setup window appears (usually a blue background, yellow English word).

2. Select and enter the second item, "BIOS Setup" (BIOS setup). Locate the item or group that contains the boot text, and find the "first", "Secend", "third" three items in sequence, representing "start of" "Second start" and "Third start" respectively. Here we sequentially set to "CD-ROM" "Floppy" "hard disk" can be. (If this page does not see these three E, usually boot to the right of the option menu is "SETUP", then press ENTER to see the entry) should choose "First" hit Enter, in the out of the submenu Select CD-ROM. Press ENTER again

3. Choose a good starting mode, press the F10 key, the E-Text dialog box, press the "Y" key (can be omitted), and enter, the computer automatically restart, proof of the change of the settings effective.



 second step, install XP system from CD

 in the XP installation CD before restarting, press ENTER when you see the word "CD" at the bottom of the screen. To achieve light, or the computer began to read the hard drive, that is, skip the light boot from the hard drive.

After the XP system disk is installed, the blue background of the installation interface, then the system will automatically analyze the computer information, do not need any operation, until the display screen darkened, then appear in the blue background of the Chinese interface.

 This is the first occurrence of the XP system protocol, press the F8 key (Representative agreed to this agreement), then you can see the hard disk all the partitions of the information list, and have Chinese operation instructions. Select C disk, press D to delete the partition (remember the first C disk of useful files for backup), the location of the C disk into "not zoned", and then in the original C-disk location (that is, "not zoned" location) press C to create the partition, the partition size need not be adjusted. After the original C disk position into the "new unused" word, press ENTER to continue.

 Next, the Format partitioning Options page appears, and the recommended option is to format the partition with FAT32 (quick). Press ENTER to continue.

The  system begins to format the C disk, which is fast. After formatting is the analysis of the hard drive and the previous Windows operating system, the speed is also very fast, and then copy the file, approximately 8-13 minutes (depending on the configuration of the machine).

 Copy File (100%), the system will automatically reboot, when the CD-ROM is seen again ... , you do not need to press any key to enable the system to boot from the hard drive, as part of the installation file has been copied to the hard drive (note: The disc cannot be removed at this time).

 The blue background of the Color XP installation interface, the left side has the installation progress bar and the remaining time display, the starting value of 39 minutes, but also according to the configuration of the machine, usually p4,2.4 machine installation time is about 15-20 minutes.

 at this point until the installation is complete, the computer automatically restarts, in addition to the input serial number and computer information (fill in at will), and knock 2 to 3 times return, do not need to do any other operation. The installation will be completed automatically by the system.



 third step, drive the installation

1. After reboot, remove the disc, let the computer boot from the hard drive, and enter the XP Settings window.

2. Press "Next", "Skip", select "Do not register", "Finish".

3. Enter XP system desktop.

4. Right-click on the desktop, select Properties, select the Display tab, click on the "Customize desktop" item, tick "My Computer", and choose "OK" to exit.

5. Back to the desktop, right click on "My Computer", select Properties, select the Hardware tab, and select Device Manager, which is the management window for all hardware in the computer, in which all previous options for yellow question mark + exclamation marks represent hardware that does not have a driver installed, double hit open its properties, and select Reinstall the driver, put it in the appropriate drive disc, select "Auto Install", the system will automatically recognize the pair should be driver and install complete. (Audio for the sound card, VGA for the video card, SM for the motherboard, you need to first install the motherboard driver, such as no SM items are not installed). Restart the computer after all drivers have been installed. The driver installation is complete.