How to set boot up from CD drive

Describes two ways to set the CD-ROM priority boot, the first: Awardbios set the CD-ROM boot method, the second: Phoenixbios set the CD-ROM boot method.

　　Step method

　　1, Awardbios set up the optical drive boot method:

Press Del to enter this interface, select the second BIOS Features setup, enter. This means the BIOS feature setting.

2, set the boot sequences project, press PageUp or PageDown selection.

3, set to Cdrom,c,a, that is, the starting sequence for the CD-ROM drive, hard drive, floppy drive.

4, press Esc key to exit, press F10 to save, select Yes return

　　5, Phoenixbios set up the optical drive boot method:

Phoenix Motherboard BIOS Setup interface, you need to press the F2 key on the power-on. Tip: Different motherboards are slightly different, you can look at the bottom of the screen at post information.

6, enter the boot menu, you can start the sequence of settings. Here you can set the boot sequence for the optical drive, hard drive, and so on.

7, when selected, by pressing the "-" or "+" key, you can set up and move the CD-ROM drive, adjust it to the last one can let the optical drive first boot.

8, press "+" key, the optical drive is set to start, then you can press Esc key to exit.

9, press F10 key, prompted whether to save the exit, select "YES", enter, exit after the CD-ROM drive into the system CD-ROM can boot system from the CD drive.

　　Hint: because the BIOS version of the interface is not exactly the same, so these pictures and your actual machine will slightly different, but roughly the same, for the vast number of users to refer to!!! In addition, the BIOS settings due to the motherboard manufacturer different and different, enter the BIOS shortcut keys are also different (some F2, some of the F10, boot at the bottom of the screen at the end of the prompts), generally under the boot tag, BIOS settings on the right side will be prompted to do. Do not change after entering the BIOS, this thing is very important, if the error may not even go into the system. We just need to change the order of the letter in the computer startup. Some people do not know when to press the DEL key, then tell you a stupid way, restart the computer has been pressed.

10, set the order roughly according to the following methods:

1. Restart the computer, press the DEL key to enter the BIOS settings (for notebooks, press F2 to enter the BIOS).

2. Use the arrow keys to select the Advanced BIOS Features.

3. Enter the BIOS setup page.

4. Select the boot Device or (1st boot Device) through the arrow keys.

5. Use the UP and DOWN ARROW keys to select CDROM.

6. Press ESC to return to the BIOS setup interface.

7. Use the arrow keys to select Save &exit Setup.

8. Press the Y key to enter, the computer automatically restart.

11, the BIOS in the Chinese and English control set diagram

12, Figure 1: Optical drive startup settings.

13, Figure 2: To save the exit after return.

14, Figure 3: Prompt the user, must choose "yes" or "yes".

15, Figure 4: Understand the Awardbios motherboard into the CD-ROM boot path, first find "advanced BIOS features", enter into the carriage.

16, and then find the first startup items, enter after the selection of CDROM can be.

Above is our common motherboard's light setting, the simple learned, the other is very easy.