How to set up a wireless network share under Win7

Home has two laptops have wireless network card, now want to make two notebooks are able to access the Internet, but do not want to buy routers, switches and other equipment, this time how to do? In fact, as long as the wireless network sharing settings can be realized, today, Piglet teach everyone in the Win7 how to set up wireless network

Tools/raw Materials:

Local network can connect to Internet

Host two network cards (local network card, wireless network card)

Extension (wireless network card)

Methods for setting up wireless network sharing

1 from the lower right corner of the network Connection identification or control panel into the network and Sharing center, on the left menu, select "Change Adapter Configuration"

2 Locate the local connection that is already connected, and then right-click the menu bar to select Properties.

3 in the Properties pop-up window, locate the Sharing tab and check "Allow others to share internet connections." Note here that if there is only one network, the Shared tab does not exist, so when you set up the wireless network temporarily enabled to ensure that the sharing smoothly.

4 then go back to "Change adapter settings", find "wireless network Connection", right-click menu bar, select "Properties"

5 under the "Network" tab, locate "Tcp/ipv4" and click Properties.

Then, under the window of the pop-up properties, IP changes are made: ip:192.168.0.1 subnet mask: 255.255.255.0 default gateway: 192.168.0.1 First DNS server: 192.168.0.1 standby Blank click OK.

More than 6 operations are done on the host, this step is for the extension also IP settings. Steps are the same as steps 5 and 6, but the IP is different. Extension the same wireless network card properties to change the IPv4, and the host is different from the IP 192.168.0.X (X can be any number of 0~255 except 1), the other numeric settings and host the same.

7 After the above settings, are determined, you can do the extension of wireless Internet access. The host of course also can, the extension of IP for your 6th step to set the IP address. However, if you are unable to connect at this time, the ICS service may not be turned on, so follow the steps in the next column.

End

ICS Service-initiated settings

On the desktop, right click on "Computer" and select "Manage" in the Drop-down menu box.

In the left menu of the Computer Management window, select services under Services and applications, and then find Internetconnectionsharing (ICS) in the list of services in the middle

Right-click on the selected ICS service and select "Properties" in the menu bar

In the Properties window, on the General tab, select the Startup type as automatic and then click Start

If the prompt fails to start some of the services that are dependent on ICS are not started, click on the "Dependencies" tab in the attribute, and then find the 4 services in the Service management list, set to the Autostart type as before, and click "Start" to try to open the service, and if the service cannot be opened, continue to search for the service's Dependency service until all 4 services that are dependent on ICS are turned on to open the ICS service.