How to Set up a wireless router (group chart)

Now wireless products are cheaper, and many families purchase wireless products to fully enjoy wireless Internet access. Many users often encounter wireless router configuration problems, which lead to the final failure to access the Internet. Generally, different wireless router configurations are not the same, but the setting principles are not too different. Maybe a wireless router has one more function, and the setting is different. The following describes the problems encountered in the wireless router settings.

PC and wireless route connection

First of all, you must connect to the wireless router correctly. Before configuring a wireless router, you must connect the PC to the wireless router with a network cable. the other end of the network cable must be connected to the LAN port of the wireless router, connect the Modem line to the WAN port of the wireless router. For example

Log on to the wireless router management interface. Enter 192.168.1.1 on IE of the PC connected to the wireless router. The default Management IP address of most wireless routers is 192.168.1.1, and the user name and password are admin, for details about which wireless router is available, refer to the relevant instructions, which indicate the user name and password used to log on to the management interface of the wireless router.

If the IP address cannot be opened after 192.168.1.1 is entered, it is the Network Setting Problem of the PC. When the connection attribute is enabled, the IP address is set to 192.168.1.x, And the IP address is set to 2 to 255.) The Gateway can ignore other default values. Or you can choose to automatically assign an IP address.

After entering the wireless router configuration interface, the system will automatically pop up a "setting wizard ". For new users, follow the "Setup Wizard" to proceed. In fact, the "setting wizard" is the same as manually setting the project.

In the network parameter settings of the wireless router, you must set the parameters of the LAN port and WAN port. In practical applications, many users only set the WAN port, and the LAN port settings keep the default status of the wireless router.

Vrowan WAN port settings:

If the WAN port is connected to a device with a dynamic IP address, you should select a dynamic IP address user. However, this situation is rare. Generally, only the PPPoE mode or static IP address mode is used in the household. If you want to use wireless router dialing, you should select PPPoE mode and enter the corresponding ADSL user name and user password. If it is a fixed IP address connected to the WAN port, the static IP address is used for user exploration, if.

Router LAN port settings:

After configuring the LAN port and WAN port, we need to configure the Wireless Parameters below. When configuring a wireless router, there is no step strictly. I suggest you configure it in the order on the wireless router configuration page.

Wireless Configuration:

In basic settings, you can disable the function when you do not need a wireless network. Many brands do not currently have this function. 14 channels are available, generally 11 to 11 brands ~ 13 channels. We recommend that you use the best channel for automatic switching.

Wireless encryption must be set. If you forget to set your password, you may be prone to broadband theft and intrusion into your computer. If you hit a hacker, planting Trojans or viruses can be painful. Therefore, after enabling the wireless network, remember to modify the wireless encryption. The password setting method is simple. You only need to set a password in the wireless router and enter it on the wireless Nic.

Access control is managed by MAC addresses, which allow and deny access management, just like MAC Address binding management.

We recommend that you select automatic in advanced settings, such as the rate and the type of the leading frame.

The connection list shows the number of wireless connections, including the MAC address, status, frequency band, and speed.

The functional interface of the device is full of Chinese characters. In addition, there are quick guides and help. As long as you carefully read the introduction in the help, I believe it is not difficult to set it up. After these settings are complete, enable the corresponding wireless network on the PC side to access the Internet.

1. Classic settings of TP-Link wireless routers
2. Wireless router settings from entry to entry