How to install system steps with U disk

Before installing the system a USB disk that can start a computer and a download starter easy U disk system need to be prepared before the system is installed. One is the operating system of the mirror, the other is able to start the U disk. Here we will explain how to install the ghost version of the XP system.

Note: Read this article to understand some of the basics of installing the operating system.

The first is to create a computer to start a windowspe with the boot U disk

First go to the Internet to download the "Start Easy" tool to the hard disk, and then the U disk connected to the computer, and then follow the steps of the following step-by-step can be made to start a U disk.

Select item 4th, then enter

Enter the disk character of the U disk and return

Come to the formatting step, press the default setting, click "Start" on the line

Smooth formatting

Boot section

Here to explain, in the "device" there are two options, one is the computer's hard disk, one is to make a U disk. Here must choose the U disk and do not choose the wrong hard drive, from the size can be divided out which is a U disk. The author of the U disk is 2G, so should choose (HD1) [1898M]. The "Options" section below can be done without a tube, and the default is to not check any parameters. After you confirm the above steps, click Install and then proceed to the next step.

Write boot complete, press any key to continue

To set a password for the boot disk.

Originally I do not want to set the password to start a U disk, but this step can not be skipped, so there is no way to have to set a password. After setting up, be sure to keep in mind that you set the password, otherwise the boot U disk will not be able to use.

Finished production

When you have completed the above steps, congratulations, a startup function of the U disk has come to your side. You don't have to be upset anymore. No optical drive can be started from the optical drive, because you will be able to start and install the operating system from the U disk later! (If this method is not possible can not use U disk to start the computer can refer to http://www.qidongyi.com/wz_215.htm

(A different method or tool is written)

Set the computer's first boot to USB device startup

In the past, the CD-ROM system must be adjusted to start the CD-ROM drive, and now we have to use U disk installation system, so you want to adjust the boot for U disk. On this, different computer versions of the BIOS have different settings, but are the same, the purpose is to let the computer's first boot into a U disk startup. Below we illustrate several different bios adjustment methods.

The most common phoenix-award bios option, select USB-HDD

BIOS tuning options for Dell-branded machines

BIOS for ThinkPad Series notebooks

The BIOS for HP commercial notebooks can see that all of the BIOS options are different, but the adjustment options are for one purpose: The computer's startup is set to boot from the USB device, so that the effect of starting the computer from the U disk can be achieved.

Install XP with a USB disk that can be started

Start with the launch function of the U disk connected to the computer to start the computer to start the computer, you can see a selection menu, select "WinPE Mini Maintenance System (By:maotao)." You will be asked to enter the password to start a U disk, which is the password you set when you start the USB drive. When you enter the correct password,

Enter WinPE and then enter a mini operating system running on a U disk (not on a computer's hard drive) WinPE, which has a lot of features like XP, and with it we can do whatever the computer wants.

You can format c disk (the format of the file system you want to install is NTFS or FAT32) How do you do it? can be directly to the C disk format operation, this is shocking enough? Before installing the new XP, we will first format the C disk.

Use the WinPE on the USB disk to format the C-disk in the computer and start another WinPE Norton Ghost with its own software. Use it to restore the ghost image of the system to the C disk of the previously formatted computer. (here to introduce the ghost mirror image, download the ghost version of the system mirror ISO format, using the decompression file to WINXPSP3. Gho this file to the specified folder, U disk can also be, to the U disk must be completed after the boot disk and then enter the test

It's no different from the usual steps to use ghost.

After starting the ghost, the use of the method is no different from the usual use of ghost to recover the system. Select the local parfifion after the from Image, and then find the Winxpsp3.gho you unzipped, select the hard disk you want to restore to, and then choose the partition you want to restore to.

Locate the mirrored file (this file is extracted from the mirrored file or copied from the CD and placed in the root directory of the partition or U disk)

Select the disks to restore

Select the partition you want to revert to

Before you choose, a dialog box pops up asking if you want to restore the specified Gho image to the computer's C disk, and click Yes.