How to set up Tplink router fiber

Source: Internet
Author: User

tplink Router Optical fiber Setup Method

First, fiber optic cable, computer, wireless router connection method

Fibre-optic cable because there is no cat, you need to connect directly to the router, and you need to connect to a special WAN port on the wireless router, and there are four other core LAN ports that users connect to the computer. In addition, we also need to connect the router for the wireless router, the following is the optical cable, computer, wireless router Connection diagram:

Optical cable, computer, wireless router connection schematic

As shown in the figure above, we see a gray network cable for the Internet from the outside to the home of the optical cable, the cable interface, directly connected to the wireless router's WAN port, and the other four core LAN port interface color is different, we can easily distinguish, and the port below will be labeled WAN port. Another yellow cable is one end connected to the computer (the author here to show you are connected to the author notebook), the other end of the wireless router connected to the four LAN port of any one can, and finally the black line of the connection of the Power box plug, the overall connection effect far look, the following figure:

Fiber optic cable, computer, wireless router connection method

As shown above, in order to facilitate the demo, the author put the wireless router at the top of the notebook, in the next operation, we need to enter the computer operation, it is necessary to put the router next to. The installation of fiber-optic router is basically finished here, next we are going to set up the fiber-optic wireless router, before setting, we first have to understand the router's IP default login address and the network provider to our Internet account and password.

How to find router logon IP address and Internet account

1, first of all, said the router's IP address, this different router default login address may be different, most of them are 192.168.1.1, and the router login user password and password is usually admin, you can see the bottom of your wireless router callout, the following figure:

Routers at the bottom of the router will be labeled IP address and user name, password and other information

As shown above, the author uses the Tp-link wireless router, the IP address of its login management is 192.168.1.1, username and password are all admin, please refer to your router on the mark.

2, again, the business to provide us with the broadband account password problem, the author is pulling 10M unicom fiber network, go to the office, in the application, the Network Chamber of Commerce to give you the Internet account and password, if not, please connect the local broadband network operators, the following figure:

Internet accounts and passwords provided to us by internet operators

Connected to their own router login IP address and the Internet account and password, we can go to set up a wireless router. Let me introduce the following details.

Second, the optical fiber wireless Router Setup Guide

1, first open the computer, and then any open a Web page, and then in the browser URL in addition to enter their own router login IP address, the following figure:

As shown above, to the author of the wireless Router for example, first in the browser address bar input 192.168.1.1 and then press ENTER, you can pop up the following User Login dialog box, we are the default user name and password, and then click on the bottom of the "OK" to enter the wireless router built-in interface.

2, enter the router to set up the interface, we first click on the left-hand side of the navigation inside the "Setup Wizard" the following figure:

Go to the Router Setup Wizard

3, click the "Setup Wizard" after the first choice will pop up a prompt interface, we directly click Next, the following figure:

4, Next we will see the request we choose "Internet mode", usually we are the merchant to provide our Internet account and password, so usually choose the second "Ppoe virtual dial-up Internet", as shown in the following figure, if you are not sure, you can consult the network business or choose "Let the router automatically choose the Internet Way" can be, When you are finished, click Next to continue.

Choice of fiber-optic router settings Internet access mode

5, next we will see the request we enter the Internet account and password, this is the network provider to our Internet account and password, mentioned above, fill in the account has a password.

Internet accounts and passwords provided to us by internet operators

Fill out the Internet account password provided to us by the network provider

When we're done, we click Next and we're done with the most basic router setup, and sometimes we're prompted to reboot the router and we're sure to reboot. So the basic setup of the router is complete, we can try to use the computer can be normal access to the Internet, if the normal access to the Internet, then the above steps are not correct, if not normal, please reset the wizard, pay attention to the selection of the Internet, do not know friends please consult the network business, or try to To the last input online account and password must be careful. Generally carefully follow the steps above to set up no problem.

Above we completed the wireless router wired Internet section, other computers as long as the network cable to the computer and wireless routing has its other LAN port connection can already have access to the Internet. But for smartphones, laptops, tablets for wireless internet is more convenient, so we also need to open wireless router wireless function, and set the wireless password, next we will introduce the next fiber cable wireless network settings method.

1, also in the wireless router settings interface, we click on the router to set the interface inside the wireless settings, then a series of wireless settings below, we first click on the "Basic settings", and then on the right side will show the basic wireless network settings interface, the following figure:

As shown above, we are in the SSID location for their own wireless network input a name, convenient wireless settings to search for wireless network signal, quickly find their own wireless network, for example, the author fill in the Name: WWW.PC841.COM (This everyone can fill in), and then tick on the bottom of the selection " Turn on the wireless feature "and" Open SSID Broadcast ", and then click" Save "at the bottom.

2, after the completion of the above steps, we click on the left Wireless settings menu under the "Wireless security Settings", the same on the right will pop up "wireless network security Settings" interface, the following figure:

As pictured above, we first choose WPA2 encryption, and then in the PSK password that column, fill in the wireless network password, in order to prevent others rub the net, this password as far as possible to set as complex, do not set to 12345678 what, it is easy to be guessed by others, the risk of being rubbed against the net again, It is recommended to use letters to combine passwords in numbers as much as possible. When we're done, we'll click "Save" at the bottom, and then the wireless network settings for the fibre router have been completed, and if you have a smartphone or laptop or a tablet on your side, you can try to use a search wireless network and then find our own wireless network connection, Then enter the password we have set can be successfully connected to achieve wireless internet, the following figure:

The laptop is connected to the wireless internet.

Introduction here, about the fiber-optic router How to set up a tutorial on the whole, the overall optical fiber wireless router settings than our ordinary cat + Wireless wireless router to set the way is simpler, because the cat and wireless router connection part.

In addition, it is worth mentioning that the above is the author of the optical cable +tp-link wireless router settings, if you are other brand routers, the basic setup steps are the same, not the same as the router set the interface of the layout is different, I believe we can extrapolate.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.