Tile is probably every home decoration to use the material, but the inherent characteristics of the tiles will let them over time some problems, the most important problem is the fall of the tile. So, is there a way to remedy the loss of the home tiles? Here's a weapon for everyone to save the fallen tiles.
For various reasons, the use of wall tiles after a period of time, often occurred in the local tile empty drum or even off, not only affect the use of the effect, but also to complete the wall and the ground left a block of unsightly "scar." If this is the case, you might want to fix it in the following ways:
First, if the mortar is not loose, only the tile off, can be the back of the tile and the surrounding adhesive mortar scraping, in 107 glue mixed with a little cement into a paste, on the back of the tile evenly coated with a thin layer, and later press the tile can be sticky.
Second, if the mortar together with the tile drop, first on the original base surface lightly chisel some Mao pits, with 107 glue mortar re-inlaid paste, or with cement, E-44 epoxy, acetone, ethyl two amine according to the proportion of 5:3:2:1 mix evenly after (this kind of goods chemical stores are sold), brush on the base surface of a layer, Then press the fallen tiles up until the mortar hardens.
Note that if the tile is only partially off, do not hit the base surface of the mortar, to shock loose around the original solid tiles.
Hurry up and save the fallen tiles and let them regain their new life again.
How to get the tile off how to tinker with clever tricks